Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa fusa remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

SA-70
              SUSPENSION AND AXLE   -   FRONT UPPER SUSPENSION ARM
                                                                                   SA1K6-03


                            REMOVAL
                            1.   REMOVE SHOCK ABSORBER WITH COIL SPRING
                                 (See page SA-63)
                            2.   w/ ABS:
                                 DISCONNECT ABS SPEED SENSOR WIRE HARNESS
                                 CLAMPS
                            Remove the 2 bolts and ABS speed sensor wire harness
                            clamps from the steering knuckle and upper suspension arm.
                            3.   DISCONNECT UPPER BALL JOINT
                            (a) Remove the cotter pin and loosen the nut.




                            (b) Using SST, disconnect the upper ball joint.
                                SST 09950-40011 (09951-04010, 09952-04010,
        SST
                                       09953-04020, 09954-04010, 09955-04031,
                                       09958-04011)
                            (c) Support the steering knuckle securely.
                            (d) Remove the nut.
                            4.  REMOVE REAR FENDER APRON SEAL
                            Remove the 4 clips and rear fender apron seal.
                   R13196



                            5.   REMOVE BRAKE AND FUEL LINE CLAMP
                            Disengage the 2 brake lines and fuel line, and remove the nut
                            and brake line clamp.




                   F07269



                            6.  REMOVE UPPER SUSPENSION ARM
                            Remove the nut, bolt, 2 washers and upper suspension arm.




                   F07270

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo