Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa fwa insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
SA-5
SUSPENSION AND AXLE - FRONT WHEEL ALIGNMENT
Front FRONT WHEEL ALIGNMENT SA1FZ-06
INSPECTION
1. MEASURE VEHICLE HEIGHT (See page SS-59)
Measuring points:
A: Ground clearance of the front drive shaft center
B: Ground clearance of the front adjusting cam bolt center
B A C: Ground clearance of the rear axle shaft center
D: Ground clearance of the leaf spring front side bushing
center
Rear Vehicle height:
Front: A - B
Rear: C - D
NOTICE:
Before inspecting the wheel alignment, adjust the vehicle
D C height to the specified value.
If the vehicle height is not the specified value, try to adjust it by
pushing down on or lifting the body.
R13288
R13289 F01718
2. INSTALL CAMBER-CASTER-KINGPIN GAUGE OR
POSITION VEHICLE ON WHEEL ALIGNMENT TES-
TER
Follow the specific instructions of the equipment manufacturer.
3. INSPECT CAMBER, CASTER AND STEERING AXIS
INCLINATION (See page SS-59)
If the steering axis inclination is not within the specified value,
after the camber and caster have been correctly adjusted, re-
Z03382 check the steering knuckle and front wheel for bearing or loose-
ness.
4. ADJUST CAMBER AND CASTER
(a) Loosen the front and/or rear adjusting cam set bolts.
(b) Adjust the camber and caster by front and/or rear adjust-
ing cams (See adjustment chart).
HINT:
Try to adjust the camber and caster to the center of the specified
values.
R13227
SA-6
SUSPENSION AND AXLE - FRONT WHEEL ALIGNMENT
Example (c) How to read adjustment chart (Example).
(1) Find the applicable wheel alignment standard value
= Standard value point
= Measured value point
for the particular model.
(2) Mark the selected standard value on the adjustment
Camber chart.
Caster
Example:
Front Cam
Camber: 0◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo