Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa ras insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
SA-94
SUSPENSION AND AXLE - REAR AXLE SHAFT
SA1GB-05
INSPECTION
1. w/ ABS:
REMOVE BEARING RETAINER (DIFFERENTIAL SIDE)
AND ABS SPEED SENSOR ROTOR
(a) Attach the 4 nuts to the serration bolts, and using a ham-
mer, remove the serration bolts from the backing plate.
NOTICE:
At the time of installation, do not reuse the nuts.
R12297
(b) Grind the retainer and sensor rotor surfaces, then chisel
them out.
(c) Attach the washers and nuts to the serration bolts, then
torque the nuts to install the serration bolts to the backing
plate.
(d) Remove the 4 nuts and washers from the serration bolts.
2. REMOVE SNAP RING FROM AXLE SHAFT
Using a snap ring expander, remove the snap ring.
R12298
3. REMOVE REAR AXLE SHAFT FROM BACKING
SST PLATE
(a) Position SST on the backing plate with the 4 nuts.
SST 09521-25011, 09521-25022
SA0528
(b) Using a press, remove the rear axle shaft and bearing re-
tainer from the backing plate.
(c) Remove the SST.
SST SST 09521-25011, 09521-25022
RA0177
4. INSPECT AXLE SHAFT
Using a dial indicator, measure the runout of the shaft and
flange.
Maximum shaft runout: 2.0 mm (0.079 in.)
Maximum flange runout: 0.1 mm (0.004 in.)
If the rear axle shaft or flange are damaged or worn, or if runout
is greater than the maximum, replace the rear axle shaft.
5. INSPECT OIL SEAL (OUTER SIDE)
R12254 (a) Check for damage.
(b) Check the oil seal lip for wear or damage.
SA-95
SUSPENSION AND AXLE - REAR AXLE SHAFT
6. REMOVE OIL SEAL (OUTER SIDE)
SST
Using SST, remove the oil seal.
SST 09308-00010
7. INSPECT REAR AXLE BEARING
Check for wear or damage.
R12256
8. REPLACE REAR AXLE BEARING
SST
(a) Using SST and a press, remove the bearing.
SST 09223-56010, 09950-60010 (09951-00560)
SA0541
(b) Using SST and a press, install a new bearing.
SST 09515-30010, 09950-60020 (09951-00890)
SST
SA0536
9. INSTALL NEW OIL SEAL (OUTER SIDE)
Using SST and a hammer, install a new oil seal.
SST 09950-60010 (09951-00610),
09950-70010 (09951-07150)
10. INSPECT BEARING CASE
SST Check for wear or damage.
11. REPLACE BEARING CASE
(a) Remove the outer side oil seal (See step 5.).
SA0539 (b) Remove the bearing (See step 6.).
(c) Remove the serration bolts (See step 1.).
(d) Remove the bearing case.
SA-96
SUSPENSION AND AXLE - REAR AXLE SHAFT
Socket Wrench (e) Position the backing plate on a new bearing case and us-
ing 2 socket wrenches and a press, install the serration
bolts.
(f) Install a new bearing (See step 6.).
(g) Install a new outer side oil seal (See step 7.).
SA0532
12. REPLACE OIL DEFLECTOR
(a) Using a brass bar and hammer, remove the hub bolts, oil
deflector and gasket.
(b) Position a new gasket and oil deflector on the axle shaft
and install a washer and nut to the hub bolt and install the
hub bolt by torquing the nut.
(c) Remove the nut and washer.
13. INSTALL REAR AXLE SHAFT IN BACKING PLATE
F07363 (a) Coat the new outer side oil seal lip with MP grease.
(b) Install the backing plate and bearing retainer on the rear
axle shaft.
Bearing Side (c) Using SST and a press, install the rear axle shaft into the
backing plate.
SST 09316-60011 (09316-00051)
(d) Using a snap ring expander, install a new snap ring.
SST
R12939
122.2 ◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo