Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa ras remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                           SA-93
      SUSPENSION AND AXLE   -   REAR AXLE SHAFT
                                                                            SA0B9-07


                    REMOVAL
                    1.   REMOVE REAR WHEEL
                    2.   REMOVE BRAKE DRUM AND GASKET




                    3.     CHECK BEARING BACKLASH AND AXLE SHAFT
                           DEVIATION
                    (a) Using a dial indicator, check the backlash in the bearing
                           shaft direction.
                           Maximum: 0.7 mm (0.028 in.)
                    If the backlash exceeds the maximum, replace the bearing.
                    (b) Using a dial indicator, check the deviation at the surface
                           of the axle shaft outside the hub bolt.
           R14041          Maximum: 0.1 mm (0.004 in.)
                    If the deviation exceeds the maximum, replace the axle shaft.
                    4.     w/ ABS:
                           REMOVE ABS SPEED SENSOR FROM REAR AXLE
                           HOUSING
                    Remove the bolt and ABS speed sensor.
                    5.     REMOVE REAR BRAKE ASSEMBLY (See page
                           BR-48)




                    6.   DISCONNECT BRAKE LINE AND PARKING BRAKE
                         CABLE
SST       SST       (a) Using SST, disconnect the brake line from the wheel cylin-
                         der.
                         SST 09023-00101
                    (b) Remove the clip and pin, and disconnect the parking
                         brake cable.
                    7.   REMOVE REAR AXLE SHAFT ASSEMBLY
           F06623   (a) Remove the 4 backing plate mounting nuts.
                    (b) Pull out the rear axle shaft assembly from the rear axle
                         housing.
                    NOTICE:
                    Be careful not to damage the oil seal.
                    8.   REMOVE O-RING FROM REAR AXLE HOUSING

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo