Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa rdc disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                                                SA-107
       SUSPENSION AND AXLE     -   REAR DIFFERENTIAL CARRIER
                                                                                   SA0BP-10


                      DISASSEMBLY
                      1.    CHECK COMPANION FLANGE RUNOUT
                      Using a dial indicator, measure the vertical and lateral runout of
                      the companion flange.
                            Maximum: runout: 0.09 mm (0.0035 in.)
                      If the runout exceeds the maximum, replace the companion
                      flange.
35 mm (1.38 in.)
             W00493



                      2.     CHECK RING GEAR RUNOUT
                      Using a dial indicator, measure the ring gear runout.
                             Maximum runout: 0.05 mm (0.0020 in.)
                      If the runout exceeds the maximum, replace the ring gear.




             R04321



                      3.     CHECK RING GEAR BACKLASH
                      Using a dial indicator, while holding the companion flange, mea-
                      sure the ring gear backlash.
                             Backlash: 0.13 - 0.18 mm (0.0051 - 0.0071 in.)
                      HINT:
                      Measure at 3 or more positions around the circumference of the
                      ring gear.
                      If the backlash is not within the specified value, adjust the side
             R04322   bearing preload or repair as necessary.
                      4.     CHECK TOOTH CONTACT BETWEEN RING GEAR
                             AND DRIVE PINION (See page SA-112)




                      5.     CHECK SIDE GEAR BACKLASH
                      Using a dial indicator, measure the side gear backlash while
                      holding one pinion gear toward the case.
                             Backlash: 0.05 - 0.20 mm (0.0020 - 0.0079 in.)
                      If the backlash is not within the specified value, replace the side
                      gear thrust washer with the different thickness (See page
                      SA-112).

             R04463
SA-108
               SUSPENSION AND AXLE    -   REAR DIFFERENTIAL CARRIER

                              6.    MEASURE DRIVE PINION PRELOAD
                              Using a torque wrench, measure the preload of the drive pinion
                              using the backlash between the drive pinion and ring gear.
                                    Preload (at starting):
                                    0.5 - 0.8 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo