Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa rdc reas
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download reas documenatation <<
Text preview - extract from the document
SA-112
SUSPENSION AND AXLE - REAR DIFFERENTIAL CARRIER
SA1GD-07
REASSEMBLY
1. ASSEMBLE DIFFERENTIAL CASE
(a) Install the 2 thrust washers to the side gears.
(b) Install the 2 side gears with the thrust washers, 2 pinion
gears, 2 pinion gear thrust washers and pinion shaft.
HINT:
Align the holes for the straight pin in the differential case and
pinion shaft.
FA1121
(c) Using a dial indicator, measure the side gear backlash
while holding one pinion gear toward the differential case.
Backlash: 0.05 - 0.20 mm (0.0020 - 0.0079 in.)
If the backlash is not within the specified value, replace the side
gear thrust washer with an appropriate thickness.
HINT:
Refer to the following table to select thrust washers which will
ensure that the backlash is within the specified value.
FA1123 Washer thickness:
Thickness mm (in.) Thickness mm (in.)
1.50 (0.0590) 1.75 (0.0689)
1.55 (0.0610) 1.80 (0.0709)
1.60 (0.0630) 1.85 (0.0728)
1.65 (0.0650) 1.90 (0.0748)
1.70 (0.0669) -
(d) Using a pin punch and hammer, install the straight pin
through the holes in the differential case and pinion shaft.
(e) Using a chisel and hammer, stake the outside of the differ-
ential case pin hole.
FA1124
2. INSTALL SIDE BEARINGS
Using SST and a press, install the 2 side bearings into the differ-
SST SST ential case.
SST 09950-60010 (09951-00480, 09951-00640)
09950-70010 (09951-07150)
3. INSTALL RING GEAR ON DIFFERENTIAL CASE
SST (a) Clean the contact surfaces of the differential case and
SST
ring gear.
R13423
SA-113
SUSPENSION AND AXLE - REAR DIFFERENTIAL CARRIER
(b) Heat the ring gear to about 100◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo