Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sa rdfos repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
repl

>> Download repl documenatation <<

Text preview - extract from the document

SA-101
SUSPENSION AND AXLE - REAR DIFFERENTIAL FRONT OIL SEAL
SA1KD-05

REPLACEMENT
1. DRAIN DIFFERENTIAL OIL
2. DISCONNECT REAR PROPELLER SHAFT
2WD: See page PR-3
4WD: See page PR-10

SST 3. REMOVE COMPANION FLANGE
(a) Using a chisel and hammer, loosen the staked part of the
nut.
(b) Using SST to hold the flange, remove the nut.
SST 09330-00021

Z00638

SST (c) Using SST, remove the companion flange.
SST 09950-30012 (09951-03010, 09953-03010,
09954-03010, 09955-03030, 09956-03050)

R13357

4. REMOVE OIL SEAL
SST Using SST, remove the oil seal.
SST 09308-10010

R13358

SST 5. REMOVE FRONT BEARING
Using SST, remove the front bearing from the drive pinion.
SST 09556-22010
6. REMOVE BEARING SPACER
(a) Remove the 2 washers.
(b) Remove the bearing spacer.
7. INSTALL NEW BEARING SPACER
(a) Install a new bearing spacer.
R13359 (b) Install the 2 washers.
SA-102
SUSPENSION AND AXLE - REAR DIFFERENTIAL FRONT OIL SEAL

8. INSTALL FRONT BEARING
(a) Place the front bearing.

(b) Using SST and the companion flange, install the front
SST
bearing then remove the companion flange.
SST 09950-30012 (09951-03010, 09953-03010,
09954-03010, 09955-03030, 09956-03050)
9. INSTALL NEW OIL SEAL
(a) Coat a new oil seal lip with MP grease.

R13361

(b) Using SST and a plastic hammer, install the oil seal until
SST
its surface is flush with the differential carrier end.
SST 09316-12010, 09649-17010
HINT:
Connect the 2 SST with vinyl tape.
10. INSTALL COMPANION FLANGE
(a) Place the companion flange on the drive pinion.
(b) Coat the threads of a new nut with hypoid gear oil.
Vinyl Tape
R13360

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo