Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sf1grfe apps insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                              SF-65
    SFI (1GR-FE)   -   ACCELERATOR PEDAL POSITION SENSOR


         ACCELERATOR PEDAL POSITION
         SENSOR                                                SF1ZE-01


         INSPECTION
         1.     INSPECT ACCELERATOR PEDAL POSITION SEN-
                SOR
         (a) Connect the hand-held tester to the DLC3.
         (b) Turn the ignition switch to the ON position.
         (c) Check if the voltage (ACCEL POS) of the CURRENT
                DATA indicates the standard value.
                Accelerator pedal released: 0.5 to 1.1 V
                Accelerator pedal depressed: 2.6 to 4.5 V
         (d) Check if the voltage (ACCEL POS #2) of the CURRENT
                DATA indicates the standard value.
                Accelerator pedal released: 1.2 to 2.0 V
                Accelerator pedal depressed: 3.4 to 5.3 V
         If not using a hand-held tester, measure the voltage between
         terminals (VPA - EPA, VPA2 - EPA2) of the ECM connector
         (see page DI-34).

         2.  REMOVE ACCELERATOR PEDAL ROD
         (a) Disconnect the accelerator pedal connector.
         (b) Remove the 2 nuts and the accelerator pedal assy.
         3.  INSTALL ACCELERATOR PEDAL ROD
         NOTICE:
          S  Avoid physical shock to the accelerator pedal assy.
          S  Do not disassemble the accelerator pedal assy.
         (a) Install the accelerator pedal assy with the 2 nuts.
A23406       Torque: 5.0 Nm (51 kgfcm, 44 in.lbf)
         (b) Connect the accelerator pedal connector.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo