Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sf1grfe ects insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
insp


>> Download insp documenatation <<

Text preview - extract from the document
                                                                                                                           SF-59
                                                              SFI (1GR-FE)   -   ENGINE COOLANT TEMPERATURE (ECT) SENSOR


                                                                  ENGINE COOLANT
                                                                  TEMPERATURE (ECT) SENSOR                                 SF1Z8-01


                                                                  INSPECTION
                                                                  1.     DRAIN ENGINE COOLANT
                                                                  2.     REMOVE V-BANK COVER
                                                                  3.     REMOVE ENGINE COOLANT TEMPERATURE SEN-
                                                                         SOR
                                                                  (a)    Disconnect the engine coolant temperature sensor con-
                                                                         nector.
                                                                  (b)    Remove the engine coolant temperature sensor and gas-
                                                                         ket from the water by-pass joint.




                                                                  4.    INSPECT ENGINE COOLANT TEMPERATURE SEN-
               Ohmmeter
                                                                        SOR RESISTANCE
                                                                  Using an ohmmeter, measure the resistance between termi-
                                                                  nals.
                                                                        Resistance:
               30
                                                                        2.32 to 2.59 k at 20 _C (68 _F)
               20
                                                                        0.310 to 0.326 k at 80 _C (176 _F)
               10
                                                                  NOTICE:
RESISTANCE K




                5
                                      Acceptable                  When inspecting the water temperature sensor in water,
                3                                                 prevent water flow into the terminals. After inspection,
                2
                                                                  wipe the water off from the sensor.
                1                                                 5.    INSTALL ENGINE COOLANT TEMPERATURE SEN-
               0.5                                                      SOR
               0.3                                                (a) Install a new gasket and engine coolant temperature sen-
               0.2                                                      sor to the water by-pass joint.
               0.1                                                      Torque: 20 N



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo