Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sf1grfe inje inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
SF-28
SFI (1GR-FE) - INJECTOR
SF1YJ-01
INSTALLATION
New Insulator 1. INSTALL FUEL INJECTOR
(a) Install a new insulator to the fuel injector.
(b) Apply a light coat of spindle oil or gasoline to a new O-ring
and install it to the fuel injector.
New O-ring
A23103
(c) While turning the fuel injector to the left and right, install
it to the fuel delivery pipe.
(d) Position the fuel injector connector facing out from the
fuel delivery pipe.
Connector
(e) Apply the above procedures to the other fuel injectors.
Turn
Push
A23104
2. INSTALL FUEL DELIVERY PIPE
(a) Place the fuel delivery pipe together with the 6 fuel injec-
tors on the intake manifold.
(b) Temporarily install the 6 bolts which are used to hold the
fuel delivery pipe to the intake manifold.
Turn
(c) Check that the fuel injectors rotate smoothly.
Connector HINT:
If the fuel injectors do not rotate smoothly, the probable cause
A23105 is incorrect installation of O-rings. Replace the O-ring of the in-
jector that does not rotate smoothly.
(d) Position the fuel injector connector facing out from the
fuel delivery pipe.
(e) Tighten the 6 bolts which are used to hold the fuel delivery
pipe to the intake manifold.
Torque: 15 Nm (153 kgfcm, 11 ftlbf)
(f) Connect the 6 fuel injector connectors.
3. CONNECT FUEL PIPE NO.2
(a) Push in the tube connector to the pipe, then tube connec-
tor makes a "click" sound.
NOTICE:
S Check if there is any damage or foreign objects on the
connected part of the fuel pipe.
S After connecting, check if the pipe and connector are
securely connected by pulling them.
(b) Install the fuel pipe clamp.
4. CONNECT FUEL PIPE NO.1
SF-29
SFI (1GR-FE) - INJECTOR
(a) Push in the tube connector to the pipe, then tube connec-
tor makes a "click" sound.
NOTICE:
S Check if there is any damage or foreign objects on the
connected part of the fuel pipe.
S After connecting, check if the pipe and connector are
securely connected by pulling them.
(b) Install the fuel pipe clamp.
5. INSTALL INTAKE AIR SURGE TANK
(See page EM-62)
6. INSTALL AIR CLEANER (See page EM-89)
7. INSTALL V-BANK COVER
8. ADD ENGINE COOLANT
9. CHECK FOR FUEL LEAKS
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo