Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sf2uzfe fcr insp
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<Text preview - extract from the documentSF-84
SFI (2UZ-FE) - FUEL CUT RPM
FUEL CUT RPM SF0Q2-16
INSPECTION
1. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
Hand-Held Tester 2. CONNECT HAND-HELD TESTER
(a) Connect a hand-held tester to the Controller Area Net-
work Vehicle Interface Module (CAN VIM). Then connect
the CAN VIM to the Date Link Connector 3 (DLC3).
(b) Please refer to the hand-held tester operator's manual
for further details.
CAN VIM
DLC3
D13872
3. INSPECT FUEL CUTOFF RPM OPERATION
(a) Increase the engine speed to at least 2,500 rpm.
(b) Check for injector operating noise.
(c) Check that when the throttle lever is released, injector op-
eration noise stops momentarily and then resumes.
HINT:
S The vehicle should be stopped.
Sound Scope S Measure with the A/C OFF.
B04432 Fuel return speed: 1,400 rpm
(d) Disconnect the hand-held tester and CAN VIM from the
DLC3.
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo