Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sf2uzfe inje remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                                                   SF-27
                                          SFI (2UZ-FE)   -   INJECTOR
                                                                                                    SF133-09


                                              REMOVAL
                                              1.     DISCHARGE FUEL SYSTEM PRESSURE
                                                     (See page SF-1)
                                              2.     REMOVE THROTTLE BODY COVER
                                              3.     REMOVE INTAKE AIR CONNECTOR




                                              4.    REMOVE FUEL PRESSURE PULSATION DAMPER
                                              Remove the pulsation damper, upper gasket, fuel main hose
                                              and lower gasket.
                                              NOTICE:
                                               S    Put a shop rag under the delivery pipe.
                                               S    Slowly loosen the pulsation damper.
                                              5.    DISCONNECT PCV HOSE FROM PCV VALVE

                                     B07312



                                              6.  DISCONNECT VSV FOR EVAP
                                              (a) Disconnect the VSV connector for EVAP.
                               (a)
    (c)                                       (b) Disconnect the EVAP hose.
                               (b)
                                              (c) Remove the VSV for EVAP from the intake manifold.
                                              7.  REMOVE THROTTLE BODY COVER BRACKET
                                              Remove the bolt and throttle body cover bracket.


 Throttle Body Cover Bracket
                                     B16540



                                              8.  DISCONNECT ENGINE WIRES
                                Clamp         (a) Disconnect the engine wire clamps from the No.1 engine
                                                  hanger and engine wire bracket.
Clamp
                                              (b) Disconnect the 2 wire clamps on the engine wire from the
                                                  brackets on the RH delivery pipe.
                                              9.  REMOVE DELIVERY PIPES AND INJECTORS
                                              NOTICE:
                                               S  Be careful not to drop the injectors when removing
                  Clamp              B07045       the delivery pipes.
                                               S  Do not apply any load to the injector in horizontal
                                                  direction.
SF-28
                           SFI (2UZ-FE)   -   INJECTOR

        Fuel Return Pipe      (a)    Remove the bolt holding the clamp on the fuel return pipe
                                     to the LH delivery pipe.
                              (b)    Remove the bolt, 2 union bolts, 4 gaskets and front fuel
                                     pipe.
                              (c)    Disconnect the 8 injector connectors.
                              (d)    Remove the 4 nuts holding the delivery pipes to the lower
                                     intake manifold.
                              (e)    Remove the 2 delivery pipes, 8 injectors, and 8 insulators.
                    B17461    (f)    Remove the O-ring and grommet from each injector.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo