Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra sr psg reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
reas

>> Download reas documenatation <<

Text preview - extract from the document

SR-82
STEERING - POWER STEERING GEAR
SR02R-10

REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See pages SR-70)

2. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
SST (b) Using SST, press in the oil seal.
SST 09950-60010 (09951-00330, 09951-00490,
09952-06010), 09950-70010 (09951-07360)
NOTICE:
S Make sure to install the oil seal in the correct direc-
tion.
Oil Seal SST F08341 S Take care that the oil seal does not get reversed as
you install it.
3. INSTALL STEERING RACK
(a) Install SST to the rack.
SST 09631-20051
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b) Coat the SST with power steering fluid.
(c) Install the steering rack into the rack housing.
Rack Teeth End
NOTICE:
Be careful not to damage the oil seal lip.
(d) Remove the SST.
SST SST 09631-20051

W02101

4. INSTALL BUSHING
(a) Coat a new O-ring with power steering fluid and install it
to the bushing.
(b) To prevent oil seal lip damage, wind vinyl tape on the
steering rack end, and apply power steering fluid.
(c) Install the bushing.
NOTICE:
Vinyl Tape
S Make sure to install the bushing in the correct direc-
R11574 tion.
S Be careful not to damage the oil seal lip.
SR-83
STEERING - POWER STEERING GEAR

5. INSTALL CYLINDER END STOPPER
SST Wire (a) Align the installation hole for the wire of the stopper with
the slot of the rack housing.
(b) Install a new wire into the stopper.
(c) Using SST, turn the stopper clockwise 400

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo