Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra st1grfe star16kw disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                                    ST-5
STARTING (1GR-FE)   -   STARTER (1.6 kW)
                                                                    ST0PO-01


           DISASSEMBLY
           1.    REMOVE REPAIR SERVICE STARTER KIT
           (a)   Remove the nut, and disconnect the lead wire from the re-
                 pair service starter kit.




  A23149



           (b)   Remove the 2 screws which are used to secure the repair
                 service starter kit to the starter drive housing.
           (c)   Remove the repair service starter kit.
           (d)   Remove the return spring and plunger.




  A23150



           2.    REMOVE STARTER YOKE ASSY
           (a)   Remove the 2 through bolts, and pull out the starter yoke
                 assy together with the commutator end frame assy.
           3.    REMOVE STARTER COMMUTATOR END FRAME
                 ASSY
           (a)   Remove the commutator end frame assy from the starter
                 yoke assy.
           4.    REMOVE STARTER ARMATURE PLATE
  A23151   (a)   Remove the starter armature plate from the starter yoke
                 assy.
           5.    REMOVE STARTER COMMUTATOR END FRAME
                 COVER
           (a)   Using a screwdriver, remove the cover.




           6.    REMOVE STARTER ARMATURE ASSY
           (a)   Using snap ring pliers, remove the snap ring and plate
                 washer.
           (b)   Remove the starter armature assy from commutator end
                 frame assy.




  A23152
ST-6
       STARTING (1GR-FE)   -   STARTER (1.6 kW)

                  7.    REMOVE PLANETARY GEAR
                  (a)   Remove the 3 planetary gears.




         A23153



                  8.    REMOVE STARTER CENTER BEARING CLUTCH
                        SUB-ASSY
                  (a)   Remove the starter center bearing clutch and drive lever
                        set pin together from the starter drive housing.
                  (b)   Remove the drive lever set pin from the starter center
                        bearing clutch.



         A23154

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo