Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra st1grfe star20kw test

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download test documenatation <<

Text preview - extract from the document

ST-24
                                     STARTING (1GR-FE)     -   STARTER (2.0 kW)
                                                                                                            ST0PX-01



  Terminal 50
                                                   TEST
                                                   NOTICE:
                                                   These tests must be done within 3 to 5 seconds to avoid the
                                                   coil to be burned - out.
                                                   1.    INSPECT STARTER ASSY
                                                   (a) Do pull-in test.
                                                         (1) Disconnect the field coil lead wire from terminal C.
                                   Battery               (2) Connect the battery to the magnetic switch as
  Terminal C                              B17617
                                                               shown. Check that the clutch pinion gear protrudes.

                                                   (b)   Do holding test.
                                                         (1) Disconnect the negative (-) lead from the terminal
                                                              C with the above condition (a) is being sustained.
                                                              Check that the pinion gear remains protruded.




                Disconnect
                                          B17619



                                                   (c)   Inspect clutch pinion gear return.
                             Disconnect                  (1) Disconnect the negative (-) lead from the switch
                                                              body. Check that the clutch pinion gear returns in-
                                                              ward.




                                          B17621



                                                   (d)   Perform the operation test without load.
 Terminal 30                     Ammeter
                                                         (1) Connect the field coil lead wire to terminal C.
                                                         Torque: 5.9 Nm (60 kgfcm, 52 in.lbf)
                                                         (2) Hold the starter with a vise.
                                                         (3) Connect the battery and ammeter to the starter as
                                                              shown.
                                                         (4) Check that the ammeter indicates the specified cur-
                                                              rent.
                                          B17623         Specified current: 100 A or less at 11.5 V

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo