Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra st1grfe star20kw reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

ST-22
                            STARTING (1GR-FE)     -   STARTER (2.0 kW)
                                                                                                     ST0PZ-01


                                       REASSEMBLY
                                       1.      INSTALL STARTER BRUSH HOLDER ASSY
                                       (a)     Apply grease to the bearings, and install it to the starter
                                               yoke.
                                       (b)     Place the brush holder on the armature.
                                       (c)     Using a screwdriver, install the 4 brushes.
                                       (d)     Install a new O-ring to the groove of the field frame.

                              A23174



                                       (e)     Install the end frame with the 2 screws.
                                               Torque: 3.8 Nm (39 kgfcm, 34 in.lbf)




                              A23173



                                       2.      INSTALL MAGNET STARTER SWITCH ASSY
                                       (a)     Apply grease to the steel ball, and install it to the clutch
                                               shaft hole.
                                       (b)     Apply grease to the these parts (2) - (5), and install them
          (4)   (2)
  (3)                                          to the starter drive housing.
    (1)                                  (1)    Starter magnet switch return spring
                                         (2)    Starter idle gear pinion
                                         (3)    Starter idle gear clutch roller
                      (5)     A23172     (4)    Starter idle gear retainer
                                         (5)    Starter clutch




                                       (c)     Install the magnet starter switch with the 2 screws.
                                               Torque: 9.3 Nm (95 kgfcm, 82 in.lbf)




                              A23171
                                                                  ST-23
STARTING (1GR-FE)   -   STARTER (2.0 kW)

           3.    INSTALL STARTER YOKE ASSY
           (a)   Install a new O-ring to the groove of the starter yoke.
           (b)   Align the key of the starter yoke with the groove of the
                 magnet starter switch.




  A23181



           (c)   Install the starter yoke and armature with the 2 through
                 bolts.
                 Torque: 9.3 Nm (95 kgfcm, 82 in.lbf)
           (d)   Connect the lead wire to the C terminal with the nut.
                 Torque: 5.9 Nm (60 kgfcm, 52 in.lbf)




  A23170

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo