Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra pr psa12wd disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

PR-4
                    PROPELLER SHAFT   -   PROPELLER SHAFT ASSEMBLY (2WD)
                                                                                        PR05K-02


                              DISASSEMBLY
       Matchmarks
                              NOTICE:
                              Be careful not to grip the propeller shaft tube too tightly in
                              a vise as this will cause deformation.
                              1.    SEPARATE PROPELLER SHAFT AND INTERMEDI-
                                    ATE SHAFT
                              (a) Place matchmarks on the yoke and propeller shaft.
                              (b) Disassemble the center yoke
                     Q10882
                                    (See SPIDER BEARING REPLACEMENT on page
                                     PR-17).




                              2.    REMOVE CENTER SUPPORT BEARING FROM IN-
   Matchmarks                       TERMEDIATE SHAFT
                              (a)   Using a hammer and chisel, loosen the staked part of the
                                    nut.
                              (b)   Clamp the yoke in a vise and remove the spacer and nut.
                              (c)   Place matchmarks on the yoke and shaft.
                              (d)   Using a brass bar and hammer, remove the center yoke,
                                    dust cover, spacer and center support bearing from the in-
                     Q10880         termediate shaft.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo