Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra pr psa12wd reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

PR-6
                  PROPELLER SHAFT    -   PROPELLER SHAFT ASSEMBLY (2WD)
                                                                                         PR05L-02


                            REASSEMBLY
                            NOTICE:
                            Be careful not to grip the propeller shaft tube too tightly in
                            a vise as this will cause deformation.
                            HINT:
                            When removing or installing any part, make sure that each joint
                            is facing the correct direction, as shown in the illustration below.




                                                                                          F08477




                            1.    INSTALL CENTER SUPPORT BEARING ON INTER-
          Front                   MEDIATE SHAFT
                            HINT:
                            Install the center support bearing in the direction shown.
                            2.     INSTALL CENTER YOKE ON INTERMEDIATE SHAFT
                            (a) Coat the splines of the intermediate shaft with MP grease.
                            (b) Install the spacer and dust cover.

                   Q07493



                            (c)   Place the center yoke on the shaft and align the match-
   Matchmarks                     marks.
                            HINT:
                            If replacing either the center yoke or intermediate shaft, reas-
                            semble them so that the front side yoke of the intermediate
                            shaft and the center yoke are facing the same direction.
                            (d) Install the spacer.
                            (e) Clamp the yoke in a vise, and press in the bearing by tight-
                   Q10880          ening with a new nut.
                                   Torque: 181 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo