Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra pr psa14wd disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                                                   PR-11
              PROPELLER SHAFT       -   PROPELLER SHAFT ASSEMBLY (4WD)
                                                                                    PR05O-03



Matchmarks
                            DISASSEMBLY
                            NOTICE:
                            Be careful not to grip the propeller shaft tube too tightly in
                            a vise as this will cause deformation.
                            1.    Rear propeller shaft:
                                  SEPARATE PROPELLER SHAFT AND INTERMEDI-
                                  ATE SHAFT
                            (a) Place matchmarks on the flanges.
               R04445
                            (b) Remove the 4 nuts, bolts and washers.

                            2.    Rear propeller shaft:
                                  REMOVE CENTER SUPPORT BEARING FROM IN-
                                  TERMEDIATE SHAFT
                            (a)   Using a hammer and chisel, loosen the staked part of the
Matchmarks
                                  nut.
                            (b)   Using SST to hold the flange, remove the nut and spacer.
                                  SST 09330-00021
             SST
                            (c)   Place matchmarks on the flange and shaft.
                   Z04243



                            (d)   Using SST, remove the flange from the intermediate
                                  shaft.
             SST
                                  SST 09950-30012 (09951-03010, 09953-03010,
                                         09954-03010, 09955-03030, 09956-03020)
                            (e)   Remove the spacer and center support bearing from the
                                  intermediate shaft.



               Q06613

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo