Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra pr psa14wd insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

PR-12
                 PROPELLER SHAFT    -   PROPELLER SHAFT ASSEMBLY (4WD)
                                                                                       PR01P-03


                           INSPECTION
                           NOTICE:
                           Be careful not to grip the propeller shaft tube too tightly in
                           a vise as this will cause deformation.
                           1.    INSPECT PROPELLER SHAFT AND INTERMEDIATE
                                 SHAFT FOR DAMAGE OR RUNOUT
                           Using a dial indicator, check the runout of each shaft.
                                 Maximum runout: 0.8 mm (0.031 in.)
                  Z04240
                           If shaft runout is greater than the maximum, replace it.

                           2.     INSPECT SPIDER BEARING
                           (a)    Inspect the spider bearing for wear or damage.
                           (b)    Using a dial indicator, check the spider bearing axial play
                                  by turning the yoke of the flange while holding the shaft
                                  tightly.
                                  Maximum bearing axial play:
                                  Front propeller shaft: 0.05 mm (0.0020 in.)
                                  Rear propeller shaft: 0 mm (0 in.)
                  Z04241   If the spider bearing axial play exceeds the maximum, replace
                           it (See page PR-17).




                           3.     Rear propeller shaft:
                                  INSPECT CENTER SUPPORT BEARING FOR WEAR
                                  OR DAMAGE
                           Check that the bearing turns freely.
                           If the bearing is damaged, worn, or does not turn freely, replace
                           it.



                  R04478



                           4.    Rear propeller shaft:
                                 INSPECT DOUBLE CARDAN JOINT PROPELLER
                                 SHAFT
                           (a) Inspect the shaft for wear or damage.
                           (b) Inspect the double cardan joint for wear or damage.
                           If any problem is found, replace the propeller shaft assembly.
        Double Cardan      HINT:
        Joint              A double cardan joint is used on the rear propeller shaft.
                  R04479

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo