Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra pr psa14wd reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

                                                                                                    PR-13
                              PROPELLER SHAFT    -   PROPELLER SHAFT ASSEMBLY (4WD)


                                        REASSEMBLY
                                        NOTICE:
                                        Be careful not to grip the propeller shaft tube too tightly in
                                        a vise as this will cause deformation.
                                        HINT:
                                        When removing or installing any part, make sure that each joint
                                        is facing the correct direction, as shown in the illustration below.


                                                                                                     PR01Q-03




Front propeller shaft:




Rear propeller shaft:




                                                                                                      F19335



                                        1.    Rear propeller shaft:
                                              INSTALL CENTER SUPPORT BEARING ON INTER-
           Front
                                              MEDIATE SHAFT
                                        HINT:
                                        Install the center support bearing in the direction shown.




                               Q07493



                                        2.    Rear propeller shaft:
                         Matchmarks           INSTALL FLANGE ON INTERMEDIATE SHAFT
                                        (a)   Coat the splines of the intermediate shaft with MP grease.
                                        (b)   Install the spacer.
                                        (c)   Place the flange on the shaft and align the matchmarks.
                                        HINT:
                                        If replacing either the center flange or intermediate shaft, reas-
                                        semble it so that the front side flange yoke of the intermediate
                               PR0011   shaft and the rear side flange yoke of the propeller shaft are fac-
                                        ing in the same direction.
PR-14
              PROPELLER SHAFT    -   PROPELLER SHAFT ASSEMBLY (4WD)

        SST             (d)   Install the spacer.
                        (e)   Using SST to hold the flange, press in the bearing by tight-
                              ening with a new nut.
                              SST 09330-00021
                              Torque: 181 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo