Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs csaa disp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
disp

>> Download disp documenatation <<

Text preview - extract from the document

RS-86
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY
RS12P-01

DISPOSAL
HINT:
S Use the same procedures for the RH side and LH side.
S The procedures listed below are for the LH side.
S When scrapping a vehicle equipped with the SRS or dis-
posing of the curtain shield airbag assembly, be sure to
deploy the airbag first in accordance with the procedure
described below. If any abnormality occurs with the airbag
deployment, contact the TOYOTA MOTOR SALES,
U.S.A., INC.
CAUTION:
S Never dispose of a curtain shield airbag assembly
which has an undeployed airbag.
S The airbag produces an exploding sound when it is
deployed, so perform the operation outdoors and
where it will not create a nuisance to nearby resi-
dents.

S When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool). Perform the op-
eration in a place away from electrical noise.
S When deploying the airbag, perform the operation at
SST least 10 m (33 ft) away from the curtain shield airbag
assembly.
S The curtain shield airbag assembly becomes ex-
tremely hot when the airbag is deployed, so do not
AB0152 touch it for at least 30 minutes after deployment.
S Use gloves and safety glasses when handling a cur-
tain shield airbag assembly with a deployed airbag.
S Do not apply water, etc. to a front passenger airbag
assembly with a deployed airbag.
S Always wash your hands with water after completing
the operation.
HINT:
Prepare a battery as the power source to deploy the airbag.
RS-87
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY

1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
(a) Check the function of the SST (see step 1-(a) on page
Battery RS-25).
SST 09082-00700
SST (b) Precaution (see page RS-1 and RS-3).
(c) Disconnect the cable from the negative battery terminal.
Wait for 90 seconds after disconnecting the cable to prevent the
AB0158 airbag working.
(d) Remove the roof headlining (see page BO-126 and
BO-133).
(e) Disconnect the curtain shield airbag connector.
NOTICE:
When handling the airbag connector, be careful not to dam-
age the airbag wire harness.

(f) Install the SST.
(1) Connect the connectors of the SST to the curtain
shield airbag assembly.
SST 09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.

SST H23222

(2) Move the SST at least 10 m (33 ft) away from the ve-
hicle rear side window.
Battery (3) Maintaining enough clearance for the SST wire har-
ness in the rear side window, close all doors and
windows of the vehicle.
NOTICE:
SST
Take care not to damage the SST wire harness.
10 m (33 ft) or more (4) Connect the red clip of the SST to the battery posi-
R13455 tive (+) terminal and the black clip of the SST to the
negative (-) terminal.
RS-88
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY

(g) Deploy the airbag.
(1) Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
S When deploying the airbag, make sure that no one is
near the vehicle.
S The curtain shield airbag assembly becomes ex-
tremely hot when the airbag is deployed, so do not
touch it for at least 30 minutes after deployment.
S Use gloves and safety glasses when handling a cur-
tain shield airbag assembly with a deployed airbag.
S Do not apply water, etc. to a curtain shield airbag as-
sembly with a deployed airbag.
S Always wash your hands with water after completing
the operation.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.
2. DEPLOYMENT WHEN DISPOSING OF CURTAIN
SHIELD AIRBAG ASSEMBLY
NOTICE:
S When disposing of the curtain shield airbag assem-
bly, never use the customer's vehicle to deploy the
airbag.
S Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of the SST (see step 1-(a) on page
RS-25).
(b) Remove the curtain shield airbag assembly (see page
Battery RS-84).
S When removing the front passenger airbag assembly,
SST work must be started 90 seconds after the ignition
switch is turned to the "LOCK" position and the nega-
tive (-) terminal cable is disconnected from the bat-
AB0158 tery.
S When storing the front passenger airbag assembly,
keep the airbag deployment side facing upward.
RS-89
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY

H23223

(d) Using a service-purpose wire harness for the vehicle, tie
Wire Harness
down the front passenger airbag assembly to the tire.
Diameter Wire harness: Stripped wire harness section
1.25 mm2 or more (0.0019 in2. or more)
CAUTION:
If the wire harness is too thin or an alternative object is
used to tie down the curtain shield airbag assembly, it may
Stripped Wire Harness Section
be snapped by the shock when the airbag is deployed. Al-
AB0163 ways use a wire harness for vehicle use with an area of at
least 1.25 mm2 (0.0019 in2.).

Width HINT:
To calculate the area of the stripped wire harness section:
Area = 3.14 x (Diameter)2 divided by 4
(1) Position the curtain shield airbag assembly inside
the tire with the airbag deployment side facing in-
side.
Inner
Tire size: Must exceed the following dimensions:
Diameter
Width: 185 mm (7.28 in.)
H23224 Inner diameter: 360 mm (14.17 in.)
CAUTION:
S Make sure that the wire harness is tight. If there is
slack in wire harness, the curtain shield airbag as-
sembly may become loose due to the shock when the
airbag is deployed.
S Always tie down the curtain shield airbag assembly
with the airbag deployment side facing inside.
NOTICE:
The tire will be marked by the airbag deployment, so use an
extra tire.
RS-90
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY

(e) Install the SST.
After connecting the SST below to each other, connect
them to the curtain shield airbag assembly.
SST 09082-00802, 09082-00760
SST

H23225

(f) Place the tires.
(1) Place at least 2 tires under the tire which the curtain
shield airbag assembly is tied to.
Tires
(2) Place at least 2 tires over the tire which the curtain
(5 or More) shield airbag assembly is tied to. The top tire should
have the disc wheel installed.
NOTICE:
Do not place the SST connector under the tire because it
H23226 could be damaged.

(3) Tie the tires together with 2 wire harness.
CAUTION:
Make sure that the wire harness is tight. Looseness in the
wire harness results in the tires coming free due to the
shock when the airbag is deployed.

H23917

Curtain Shied Airbag Assembly (g) Install the SST.
Connect the SST connector.
SST 09082-00700
NOTICE:
To avoid damaging the SST connector and wire harness,
SST do not lock the secondary lock of the twin lock. Also, se-
Battery
cure some slack for the SST wire harness inside the tire.
(h) Deploy the airbag.
10 m (33 ft) or more H23227 (1) Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
battery negative (-) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of
the tire which the shield airbag assembly is tied to.
RS-91
SUPPLEMENTAL RESTRAINT SYSTEM - CURTAIN SHIELD AIRBAG ASSEMBLY

(3) Press the SST activation switch and deploy the air-
bag.
CAUTION:
When deploying the airbag, make sure that no one is near
the tire.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.

(i) Dispose of the curtain shield airbag assembly.
CAUTION:
S The curtain shield airbag assembly becomes ex-
tremely hot when the airbag is deployed, so do not
touch it for at least 30 minutes after deployment.
S Use gloves and safety glasses when handling a cur-
tain shield airbag assembly with a deployed airbag.
S Do not apply water, etc. to a curtain shield airbag as-
H23228 sembly with a deployed airbag.
S Always wash your hands with water after completing
the operation.
(1) Remove the curtain shield airbag assembly from
the tire.
(2) Place the curtain shield airbag assembly in a plastic
bag, tie it tightly and dispose of it as other general
part disposal.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo