Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs csasa remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                                RS-111
SUPPLEMENTAL RESTRAINT SYSTEM   -   CURTAIN SHIELD AIRBAG SENSOR ASSEMBLY
                                                                                  RS0SI-08


                        REMOVAL
                        HINT:
                        S     Use the same procedures for the RH side and LH side.
                        S     The procedures listed below are for the LH side.
                        NOTICE:
                         S    If the wiring connector of the SRS is disconnected
                              with the ignition switch in the ON position, DTCs will
                              be recorded.
                         S    Never use airbag parts from another vehicle. When
                              replacing parts, replace them with new ones.
                         S    Never reuse a curtain shield airbag sensor assembly
                              if the airbag has previously deployed in a collision.
                        1.    PRECAUTION (SEE PAGE RS-1 AND RS-3)
                        2.    DISCONNECT CABLE FROM NEGATIVE BATTERY
                              TERMINAL
                        Wait for 90 seconds after disconnecting the cable to prevent the
                        airbag working.
                        3.    REMOVE REAR DOOR SCUFF PLATE
                              (SEE PAGE BO-133)
                        4.    REMOVE BACK PANEL TRIM ASSEMBLY
                              (SEE PAGE BO-133)
                        5.    REMOVE REAR SEAT OUTER BELT FLOOR ANCHOR
                              (SEE PAGE BO-133)
                        6.    REMOVE QUARTER TRIM PANEL LOWER LH
                              (SEE PAGE BO-133)
                        7.    REMOVE REAR SEAT OUTER BELT RETRACTOR
                              (SEE PAGE BO-236)



                        8.    REMOVE CURTAIN SHIELD AIRBAG SENSOR AS-
                              SEMBLY LH
                        (a) Disconnect the curtain shield airbag sensor assembly LH
                              connector.
                        NOTICE:
                        Disconnect the connector with the sensor assembly
                        installed.
                        (b) Remove the 2 nuts and curtain shield airbag sensor as-
               H23883         sembly LH.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo