Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs fpaa remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
RS-36
SUPPLEMENTAL RESTRAINT SYSTEM - FRONT PASSENGER AIRBAG ASSEMBLY
RS123-01
REMOVAL
NOTICE:
S If the wiring connector of the SRS is disconnected
and the ignition switch is in the ON or ACC position,
DTCs will be recorded.
S Never use airbag parts from another vehicle. When
replacing parts, replace them with new ones.
1. PRECAUTION (SEE PAGE RS-1 AND RS-3)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
3. REMOVE FRONT DOOR SCUFF PLATES
(SEE PAGE BO-111)
4. Standard cab:
Access cab:
REMOVE COWL SIDE TRIMS (SEE PAGE BO-111)
5. Double cab:
REMOVE COWL SIDE TRIM BOARDS
(SEE PAGE BO-111)
6. Double cab:
REMOVE SIDE PANELS (SEE PAGE BO-111)
7. REMOVE LOWER FINISH PANEL
(SEE PAGE BO-111)
8. REMOVE GLOVE COMPARTMENT DOOR
(SEE PAGE BO-111)
9. REMOVE LOWER NO. 2 FINISH PANEL
(SEE PAGE BO-111)
10. Standard cab:
Access cab (w/o Large type console box):
Double cab (Split type seat):
REMOVE LOWER CENTER COVER
(SEE PAGE BO-111)
11. Access cab (w/ Large type console box):
Double cab:
REMOVE SHIFTING HOLE COVER
(SEE PAGE BO-111)
12. Access cab (w/ Large type console box):
Double cab:
REMOVE UPPER CONSOLE PANEL
(SEE PAGE BO-111)
13. Access cab (w/ Large type console box):
Double cab:
REMOVE REAR CONSOLE BOX
(SEE PAGE BO-111)
14. Access cab (w/ Large type console box):
Double cab:
REMOVE FRONT CONSOLE BOX
(SEE PAGE BO-111)
RS-37
SUPPLEMENTAL RESTRAINT SYSTEM - FRONT PASSENGER AIRBAG ASSEMBLY
15. REMOVE LOWER INSTRUMENT COVER
(SEE PAGE BO-111)
16. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Using a clip remover, disengage the connector clamp.
(b) Disconnect the airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
H23215
(c) Remove the bolt holding the front passenger airbag as-
sembly and instrument panel.
(d) Remove the 2 bolts holding the front passenger airbag
assembly and instrument panel reinforcement.
(e) Remove the front passenger airbag assembly.
CAUTION:
S Do not store the front passenger airbag assembly
with the airbag deployment side facing downward.
H23212 S Never disassemble the front passenger airbag as-
sembly.
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo