Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs newsub4 newdoc4

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download newdoc4 documenatation <<

Text preview - extract from the document

RS-170
         SUPPLEMENTAL RESTRAINT SYSTEM    -   SEAT BELT TENSION SENSOR (Except Separate Seat)
                                                                                                RS0UY-08


                                 INSTALLATION
                                 NOTICE:
                                  S  Never use SRS parts from another vehicle. When re-
                                     placing the parts, replace them with new ones.
                                  S  Never reuse a seat belt tension sensor involved in a
                                     collision when the airbag has deployed.
                                  S  If the seat belt tension sensor has been dropped, or
                                     there are any cracks, dents or other defects in the
                                     case, bracket or connector, replace it with a new one.
                                  S  When installing the seat belt tension sensor, be care-
                                     ful that the SRS wiring does not interfere with other
                                     parts and that it is not pinched between other parts.
                                  S  After installing, shake the seat belt tension sensor to
                                     check that there is no looseness.




                                 1.    Bench type:
                                       INSTALL FRONT SEAT OUTER BELT FLOOR AN-
                                       CHOR RH (SEAT BELT TENSION SENSOR)
                                 (a)   Install the front seat outer belt RH floor anchor with the
                                       bolt.
                                       Torque: 42 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo