Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs newsub4 newdoc2
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download newdoc2 documenatation <<
Text preview - extract from the document
RS-167
SUPPLEMENTAL RESTRAINT SYSTEM - SEAT BELT TENSION SENSOR (Except Separate Seat)
RS0UV-08
REMOVAL
NOTICE:
S If the wiring connector of the SRS is disconnected
with the ignition switch in the ON position, DTCs will
be recorded.
S Never use SRS parts from another vehicle. When re-
placing the parts, replace them with new ones.
S Never reuse a seat belt tension sensor if an airbag
has previously deployed in a collision.
1. PRECAUTION (SEE PAGE RS-1 AND RS-3)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
3. Bench type:
REMOVE FRONT SEAT OUTER BELT FLOOR AN-
CHOR RH (SEAT BELT TENSION SENSOR)
(a) Disconnect the connector from the seat belt tension sen-
sor.
(b) Remove the bolt and the front seat outer belt RH floor an-
chor.
4. Split type (Passenger's Side):
cmc0238 REMOVE SEAT TRACK COVER (SEE PAGE BO-188)
5. 5.Split type (Passenger's Side):
REMOVE FRONT SEAT ASSEMBLY RH
(SEE PAGE BO-188)
6. Split type (Passenger's Side):
REMOVE SEAT LEG INNER COVER
(SEE PAGE BO-189)
7. Split type (Passenger's Side):
REMOVE RECLINING ADJUSTER RELEASE HANDLE
(SEE PAGE BO-189)
8. Split type (Passenger's Side):
REMOVE RH SEAT CUSHION SHIELD
(SEE PAGE BO-189)
9. Split type (Passenger's Side):
REMOVE SEAT CUSHION LOWER SHIELD
(SEE PAGE BO-189)
10. Split type (Passenger's Side):
REMOVE SEATBACK ASSEMBLY
(SEE PAGE BO-189)
11. Split type (Passenger's Side):
REMOVE SEAT POSITION SENSOR ASSEMBLY
(SEE PAGE BO-189)
RS-168
SUPPLEMENTAL RESTRAINT SYSTEM - SEAT BELT TENSION SENSOR (Except Separate Seat)
12. Split type (Passenger's Side):
REMOVE RH CENTER SEAT HINGE COVER
(SEE PAGE BO-189)
13. Split type (Passenger's Side):
REMOVE RH SEAT CUSHION INNER SHIELD AND
SEAT CUSHION COVER (SEE PAGE BO-189)
14. Split type (Passenger's Side):
REMOVE SEAT HINGE COVER (SEE PAGE BO-189)
15. Split type (Passenger's Side):
REMOVE OUTER SEAT TRACK LOWER FRONT AND
REAR BRACKET (SEE PAGE BO-189)
16. Split type (Passenger's Side):
REMOVE INNER SEAT TRACK LOWER FRONT AND
REAR BRACKET (SEE PAGE BO-189)
17. Split type (Passenger's Side):
REMOVE OUTER SEAT TRACK (SEE PAGE BO-189)
18. Split type (Passenger's Side):
REMOVE INNER SEAT TRACK (SEE PAGE BO-189)
19. Split type (Passenger's Side):
REMOVE SEAT CUSHION FRAME
(SEE PAGE BO-189)
20. Split type (Passenger's Side):
REMOVE FRONT SEAT INNER BELT RH (SEAT BELT
TENSION SENSOR)
(a) Disconnect the 2 connectors from the front seat inner belt
RH.
(b) Disengage the harness clamps from the seat cushion
frame.
(c) Remove the bolt and front seat inner belt RH (seat belt
cmc0239 tension sensor).
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo