Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs saapatyp disp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download disp documenatation <<
Text preview - extract from the document
RS-53
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
RS129-01
DISPOSAL
HINT:
S Use the same procedures for the RH side and LH side.
S The procedures listed below are for the LH side.
S When scrapping a vehicle equipped with the SRS or dis-
posing of the front seat airbag assy LH, be sure to deploy
the airbag first in accordance with the procedure de-
scribed below. If any abnormality occurs with the airbag
deployment, contact the SERVICE DEPT. of TOYOTA
MOTOR SALES, U.S.A., INC.
CAUTION:
S Never dispose of a front seat airbag assembly that
has an undeployed airbag.
S The airbag produces an exploding sound when it is
deployed, so perform the operation outdoors and
where it will not create a nuisance to nearby resi-
dents.
S When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool). Perform the
operation in a place away from electrical noise.
S When deploying the airbag, perform the operation at
SST least 10 m (33 ft) away from the front seat airbag as-
sembly.
S The front seat airbag assembly becomes extremely
hot when the airbag is deployed, so do not touch it for
AB0152 at least 30 minutes after deployment.
S Use gloves and safety glasses when handling a front
seat airbag assembly with a deployed airbag.
S Always wash your hands with water after completing
the operation.
S Do not apply water, etc. to a front seat airbag assem-
bly with a deployed airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.
RS-54
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
(a) Check the function of the SST (see step 1-(a) on page
Battery RS-25).
SST 09082-00700
SST (b) Precaution (see page RS-1 and RS-3).
(c) Disconnect the battery negative terminal.
Wait for 90 seconds after disconnecting the cable to prevent the
AB0158 airbag working.
(d) Remove the 4 bolts from the front seat assy (see page
RS-49 (power adjuster type), RS-64 (manual sdjuster
type) and RS-74 (passenger side of split type)).
HINT:
Keep the front seat assy LH in the cabin.
(e) Disconnect the connector (yellow colored one) from the
front seat airbag assy LH.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
H17490
(f) Install the SST.
(1) Connect the connectors of the SST to the airbag
connector.
SST 09082-00700, 09082-00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
SST
SST H17494
(2) Move the SST at least 10 m (33 ft) away from the ve-
hicle side window.
Battery (3) Maintaining enough clearance for the SST wire har-
ness in the front side window, close all doors and
windows of the vehicle.
NOTICE:
SST
Take care not to damage the SST wire harness.
10 m (33 ft) or more (4) Connect the red clip of the SST to the battery posi-
R13455 tive (+) terminal and the black clip to the battery neg-
ative (-) terminal.
RS-55
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(g) Deploy the airbag.
(1) Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
S When deploying the airbag, make sure that no one is
near the vehicle.
H17495 S The front seat airbag assembly becomes extremely
hot when the airbag is deployed, so do not touch it for
at least 30 minutes after deployment.
S Use gloves and safety glasses when handling a front
seat airbag assembly with a deployed airbag.
S Do not apply water, etc. to a front seat airbag assem-
bly with a deployed airbag.
S Always wash your hands with water after completing
the operation.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.
2. DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG
ASSEMBLY
NOTICE:
S When disposing of the side airbag assembly, never
use the customer's vehicle to deploy the airbag.
S Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.
(a) Check the function of the SST (see step 1-(a)).
(b) Remove the front seat airbag assembly (see page
RS-49 (power adjuster type), RS-64 (manual sdjuster
type) and RS-74 (passenger side of split type)).
SST
(c) Remove the seatback assembly (see page RS-49
(power adjuster type), RS-64 (manual sdjuster type) and
RS-74 (passenger side of split type)).
AB0152
RS-56
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(d) Remove the 2 nuts and side airbag assembly from the
seatback assembly.
CAUTION:
S When removing the front seat airbag assembly, work
must be started 90 seconds after the ignition switch
is turned to the "LOCK" position and the negative (-)
terminal cable is disconnected from the battery.
S When storing the front passenger airbag assembly,
keep the airbag deployment side facing upward.
H23934
(e) Using a service-purpose wire harness for the vehicle, tie
Wire Harness
down the front passenger airbag assembly to the tire.
Diameter Wire harness: Stripped wire harness section
1.25 mm2 or more (0.0019 in2. or more)
HINT:
To calculate the area of the stripped wire harness section:
Area = 3.14 x (Diameter)2 divided by 4
Stripped Wire Harness Section CAUTION:
AB0163 If the wire harness is too thin or an alternative object is
used to tie down the front passenger airbag assy, it may be
snapped by the shock when the airbag is deployed. Always
use a wire harness for vehicle use with an area of at least
1.25 mm2 (0.0019 in.2).
(1) Install the 2 nuts to the side airbag assembly.
H17493
RS-57
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(2) Wind the wire harness around the stud bolts of the
side airbag assembly as shown in the illustration.
H17497
Width (3) Position the side airbag assembly inside the tire
with the airbag deployment direction facing inside.
Tire size: Must exceed the following dimensions:
Inner
Width: 185 mm (7.28 in.)
Diameter Inner diameter: 360 mm (14.17 in.)
CAUTION:
S Make sure that the wire harness is tight. If there is
slack in wire harness, the side airbag assembly may
H24673 become loose due to the shock when the airbag is
deployed.
S Always tie down the side airbag assembly with the
airbag deployment side facing inside the tire.
NOTICE:
The tire will be marked by the airbag deployment, so use an
extra tire.
(f) Install the SST.
(1) Connect the SST connector to the side airbag as-
sembly connector.
SST
SST 09082-00750
H24674
(g) Place the tires.
(1) Place at least 2 tires under the tire which the front
Tires seat airbag assembly is tied to.
(2 or more)
(2) Place at least 2 tires over the tire which the front
seat airbag assembly is tied to. The top tire should
have the disc wheel installed.
Tires
(2 or more)
NOTICE:
Do not place the SST connector under the tire because it
H24675 could be damaged.
RS-58
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(3) Tie the tires together with 2 wire harness.
CAUTION:
Make sure that the wire harness is tight. Looseness in the
wire harness results in the tires coming free due to the
shock when the airbag is deployed.
H23917
(h) Install the SST.
Connect the connectors of the 2 SST to the side airbag
assembly connector.
SST 09082-00700
Battery NOTICE:
SST Side Airbag To avoid damaging the SST connector and wire harness,
Assembly
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
10 m (33 ft) or more H17496
(i) Deploy the airbag.
(1) Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
battery negative (-) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of
the tire which the front seat airbag assy LH is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
H00544 CAUTION:
When deploying the airbag, make sure that no one is near
the tire.
HINT:
The airbag deploys as the LED of the SST activation switch
comes on.
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo