Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs saapsost remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
RS-74 SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Passenger Side of Split
Type)
RS12J-01
REMOVAL
NOTICE:
S If the wiring connector of the SRS is disconnected
and the ignition switch is in the ACC or ON position,
DTCs will be recorded.
S Never use airbag parts from another vehicle. When
replacing parts, replace them with new ones.
1. PRECAUTION (SEE PAGE RS-1 AND RS-3)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
3. REMOVE SEAT TRACK COVERS
Using a screwdriver, remove the seat track covers.
HINT:
Tape the screwdriver tip before use.
4. REMOVE FRONT SEAT
(a) Remove the 4 bolts.
(b) Disconnect the connectors.
(c) w/ Side airbag:
Disconnect the airbag connector.
(d) Remove the front seat.
NOTICE:
Be careful not to damage the body.
5. REMOVE HEADRESTS
6. REMOVE RECLINING ADJUSTER RELEASE HANDLE
Using a screwdriver, remove the reclining adjuster release han-
dle.
HINT:
Tape the screwdriver tip before use.
H24353
7. REMOVE RH SEAT CUSHION SHIELD
Disengage the claws and remove the RH seat cushion shield.
8. REMOVE SEAT CUSHION LOWER SHIELD
Remove the 2 screws and seat cushion lower shield.
Claw
H24352
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Passenger Side of Split RS-75
Type)
9. REMOVE SEATBACK ASSEMBLY
(a) Remove the hog rings from the seatback cover belt.
(b) Remove the seatback cover belt from the hook.
Seatback
Cover Belt
Hog Ring H24354
(c) Remove the hog rings from the seatback cover.
(d) Open the fastener.
(e) Remove the bolt and center armrest assembly.
(f) Remove the 2 bushings.
H24355
(g) Remove the hog rings from the seatback cover.
H24356
(h) w/ Side airbag:
Remove the nut and disconnect the seatback cover
brackets from the seatback frame.
H24396
(i) Remove the hog rings from the seat cushion cover.
H24357
RS-76 SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Passenger Side of Split
Type)
(j) Remove the bolt and disconnect the front seat center belt
from the seat cushion assembly.
(k) Remove the screw and RH seat cushion lower shield.
(l) Remove the 2 screws and RH reclining adjuster inside
cover.
H24358
(m) Remove the 3 nuts and disconnect the front seat center
belt.
H24359
(n) Remove the 3 bolts.
(o) Using a torx◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo