Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs sasa remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

RS-106
         SUPPLEMENTAL RESTRAINT SYSTEM     -   SIDE AIRBAG SENSOR ASSEMBLY
                                                                                           RS12T-01


                                 REMOVAL
                                 HINT:
                                 S     Use the same procedures for the RH side and LH side.
                                 S     The procedures listed below are for the LH side.
                                 NOTICE:
                                  S    If the wiring connector of the SRS is disconnected
                                       with the ignition switch in the ON position, DTCs will
                                       be recorded.
                                  S    Never use airbag parts from another vehicle. When
                                       replacing parts, replace them with new ones.
                                  S    Never reuse a side airbag sensor assembly if the air-
                                       bag has previously deployed in a collision.
                                 1.    PRECAUTION (SEE PAGE RS-1 AND RS-3)
                                 2.    DISCONNECT CABLE FROM NEGATIVE BATTERY
                                       TERMINAL
                                 Wait for 90 seconds after disconnecting the cable to prevent the
                                 airbag working.
                                 3.    REMOVE FRONT DOOR SCUFF PLATE
                                       (SEE PAGE BO-133)
                                 4.    REMOVE REAR DOOR SCUFF PLATE
                                       (SEE PAGE BO-133)
                                 5.    REMOVE FRONT SEAT OUTER BELT FLOOR AN-
                                       CHOR (SEE PAGE BO-133)
                                 6.    REMOVE CENTER PILLAR LOWER GARNISH
                                       (SEE PAGE BO-133)
                                 7.    REMOVE FRONT SEAT OUTER BELT RETRACTOR
                                       (SEE PAGE BO-236)



                                 8.      REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH
                                 (a)     Disconnect the connector from the side airbag sensor as-
                                         sembly LH.
                                 (b)     Remove the 3 bolts and the side airbag sensor assembly
                                         LH.




                        H23881

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo