Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs spsa remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
RS-118 SUPPLEMENTAL RESTRAINT SYSTEM - SEAT POSITION SENSOR ASSEMBLY (For Driver
Seat)
RS0UV-07
REMOVAL
NOTICE:
S If the wiring connector of the SRS is disconnected
with the ignition switch in the ON position, DTCs will
be recorded.
S Never use SRS parts from another vehicle. When re-
placing the parts, replace them with new ones.
S Never reuse a seat position sensor assembly if the
airbag has previously deployed in a collision.
1. PRECAUTION (SEE PAGE RS-1 AND RS-3)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the
airbag working.
3. Separate type:
Split type:
REMOVE FRONT SEAT ASSEMBLY LH
(SEE PAGE BO-141)
4. Bench type:
REMOVE FRONT SEAT ASSEMBLY
(SEE PAGE BO-166)
5. Separate type (Manual adjuster):
Split type:
REMOVE VERTICAL ADJUSTER HANDLE
(SEE PAGE BO-156)
6. Separate type (Manual adjuster):
Split type:
REMOVE SEAT CUSHION OUTER SHIELD
(SEE PAGE BO-156)
7. Separate type (Power adjuster):
REMOVE SLIDE KNOB AND RECLINING KNOB
(SEE PAGE BO-142)
8. Separate type (Power adjuster):
REMOVE SEAT CUSHION LOWER SHIELD, SEAT
CUSHION OUTER SHIELD AND SEAT CUSHION IN-
NER SHIELD (SEE PAGE BO-142)
SUPPLEMENTAL RESTRAINT SYSTEM - SEAT POSITION SENSOR ASSEMBLY (For Driver RS-119
Seat)
9. REMOVE SEAT POSITION SENSOR ASSEMBLY PRO-
TECTOR
Remove the seat position sensor assembly protector from the
seat position sensor assembly.
10. REMOVE SEAT POSITION SENSOR ASSEMBLY
(a) Disconnect the connector from the seat position sensor
assembly.
(b) Using a torx◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo