Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra rs srsair prec

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download prec documenatation <<

Text preview - extract from the document

                                                                                                         RS-1
                     SUPPLEMENTAL RESTRAINT SYSTEM    -   SRS AIRBAG


SRS AIRBAG
                                                                                                         RS01Y-61


PRECAUTION
CAUTION:
 S    The vehicle is equipped with SRS, which consists of a driver airbag, front passenger airbag,
      side airbag and curtain shield airbag. Failure to carry out service operations in the correct se-
      quence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a
      serious accident. Further, if a mistake is made in servicing the SRS, it is possible that the SRS
      may fail to operate when required. Before performing servicing (including removal or installa-
      tion of parts, inspection or replacement), be sure to read the following items carefully, then fol-
      low the correct procedures indicated in the repair manual.
 S    Wait at least 90 seconds after the ignition switch is turned to the "LOCK" position and the nega-
      tive (-) terminal cable is disconnected from the battery.
      (The SRS is equipped with a back-up power source, so that if work is started within 90 seconds
      after disconnecting the negative (-) terminal cable of the battery, the SRS may be deployed.)
 S    Do not expose the steering wheel pad, front passenger airbag assembly, side airbag assembly,
      curtain shield airbag assembly, airbag sensor assembly, front airbag sensor, side airbag sen-
      sor assembly, curtain shield airbag sensor assembly, seat position sensor assembly or occu-
      pant classification ECU directly to hot air or flames.
 S    Be sure to perform the initialization of the occupant classification ECU if any of the following
      conditions occur (see page DI-1829). If the initialization is not performed, the SRS may not oper-
      ate properly.
       S    The occupant classification ECU is replaced.
       S    Accessories (seatback tray, seat cover, etc.) are installed to the vehicle.
       S    The passenger seat is removed from the vehicle, and then reinstalled or replaced.
       S    The passenger airbag ON/OFF indicator light ("OFF") comes on when the passenger seat
            is not occupied.
       S    The vehicle is brought to the workshop for repair due to an accident or collision.
HINT:
The sensitivity check method differs according to the front seat type/separate seat and bench seat, split seat)
NOTICE:
 S    Malfunction symptoms of the SRS are difficult to confirm, so DTCs are the most important
      source of information when troubleshooting. When troubleshooting the SRS, always inspect
      DTCs before disconnecting the battery.
 S    Even in the case of a minor collision when the SRS does not deploy, the steering wheel pad,
      front passenger airbag assembly, side airbag assembly, curtain shield airbag assembly, airbag
      sensor assembly, front airbag sensor, side airbag sensor assembly, curtain shield airbag sen-
      sor assembly, seat position sensor assembly and occupant classification ECU should be in-
      spected. (see page RS-24, RS-38, RS-52, RS-67, RS-77, RS-85, RS-97, RS-102, RS-107,
      RS-112, RS-120 and RS-126).
 S    Before repair work, remove the airbag sensor if any kind of shock is likely to occur to the airbag
      sensor during the operation.
 S    Never use SRS parts from another vehicle. When replacing the parts, replace them with new
      ones.
 S    Never disassemble or repair the steering wheel pad, front passenger airbag assembly, side air-
      bag assembly, curtain shield airbag assembly, airbag sensor assembly, front airbag sensor,
      side airbag sensor assembly, curtain shield airbag sensor assembly, seat position sensor as-
      sembly or occupant classification ECU in order to reuse it.
RS-2
                    SUPPLEMENTAL RESTRAINT SYSTEM   -   SRS AIRBAG

S      If the steering wheel pad, front passenger airbag assembly, side airbag assembly, curtain
       shield airbag assembly, airbag sensor assembly, front airbag sensor, side airbag sensor as-
       sembly, curtain shield airbag sensor assembly, seat position sensor assembly or occupant
       classification ECU has been dropped, or if there are any cracks, dents or other defects in the
       case, bracket or connector, replace it with a new one.
S      Use a volt/ohmmeter with high impedance (10 k/V minimum) for troubleshooting the electrical
       circuits.
S      Information labels are attached to the periphery of the SRS components. Follow the instruc-
       tions in the caution.
S      After work on the SRS is completed, perform the SRS warning light check (see page DI-1839).
S      When the negative (-) terminal cable is disconnected from the battery, the memory will be
       cleared. Because of this, be sure to make a record of the contents memorized in each system
       before starting work. When work is finished, adjust each system as it was before. Never use
       a back-up power supply from outside the vehicle to avoid erasing the memory in any system.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo