Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Tundra 2000-2006 Approved 04-06 techinfo.toyota.com ileaf 06toyrm 06toypdf 06rmsrc 06tundra tr ros disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

TR-26
                       TRANSFER   -   REAR OUTPUT SHAFT
                                                                                TR09N-03


                        DISASSEMBLY
                        1.    INSPECT DRIVE SPROCKET THRUST CLEARANCE
                        Using a feeler gauge, measure the drive sprocket thrust clear-
                        ance.
                              Standard clearance:
                              0.10 to 0.25 mm (0.0039 to 0.0098 in.)
                              Maximum clearance: 0.25 mm (0.0098 in.)
                        If the clearance exceeds the maximum, replace the drive
              TF0516
                        sprocket.

                        2.    REMOVE HIGH AND LOW CLUTCH SLEEVE AS-
                              SEMBLY
                        (a)   Remove the clutch sleeve.
                        (b)   Using a snap ring expander, remove the snap ring.




              TF0517



                        (c)   Using a press, remove the clutch hub.




              TF0549



                        3.    REMOVE BEARING, SPACER, DRIVE SPROCKET,
                              SYNCHRONIZER OUTER, CENTER AND INNER
        SST                   RINGS AND FRONT DRIVE CLUTCH SLEEVE AS-
                              SEMBLY
                        (a)   Using SST and a press, remove the bearing.
                              SST 09555-55010



              TF0518



                        (b)   Remove the spacer and ball.
                        (c)   Remove the drive sprocket, needle roller bearing, syn-
                              chronizer outer, center and inner rings.
                        (d)   Remove the front drive clutch sleeve assembly.
                        4.    REMOVE 3 SHIFTING KEYS AND 2 KEY SPRINGS
                              FROM FRONT DRIVE CLUTCH SLEEVE



              F07989

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo