
TR-2
TRANSFER - TROUBLESHOOTING
TROUBLESHOOTING
TR09F-03
PROBLEM SYMPTOMS TABLE
Use the table below to help find the cause of the problem. The numbers indicate the priority of the likely cause
of the problem. Check each part in order. If necessary, replace these parts.
Symptom Suspected Area See page
1. Oil (Level low) TR-5
Noise 2. Oil (Wrong) TR-5
3. Transfer faulty TR-6
1. Oil (Level too high) TR-5
2. Gasket (Damaged) TR-6
Oil leakage
3. Oil seal (Worn or damaged) TR-36
4. O-ring (Worn or damaged) TR-6
1. 4WD fuse -
2. Wire harness -
3. 2WD/4HI switch TR-39
4. Vehicle speed sensor BE-86
5. 4WD position switch TR-7
Shift from 2WD to 4WD (4HI) impossible
6. 4HI indicator light BE-86
7. Actuator assembly TR-39
8. A.D.D. control system SA-59
9. 4WD control ECU TR-39
10. Transfer assembly TR-6
1. 4LO switch TR-39
2. Vehicle speed sensor BE-86
3. L4 position switch TR-7
4. Park/neutral position switch DI-993
Shift from 4WD (4HI) to 4WD (4LO) impossible
5. 4LO indicator switch BE-86
6. Actuator assembly TR-39
7. Wire harness -
8. 4WD control ECU TR-39
1. 4WD fuse -
2. Wire harness -
3. 2WD/4HI switch TR-39
4. Vehicle speed sensor BE-86
5. 4WD position switch TR-7
Shift from 4WD (4HI) to 2WD impossible
6. 4HI indicator light BE-86
7. Actuator assembly TR-39
8. A.D.D. control system SA-59
9. 4WD control ECU TR-39
10. Transfer assembly TR-6
1. 4LO switch TR-39
2. Vehicle speed sensor BE-86
3. L4 position switch TR-7
4. Park/neutral position switch DI-993
Shift from 4WD (4LO) to 4WD (4HI) impossible
5. 4LO indicator switch TR-7
6. Actuator assembly TR-39
7. Wire harness -
8. 4WD control ECU TR-39