Service Manuals, User Guides, Schematic Diagrams or docs for : . Electronic Components Datasheets Passive components capacitors Wmec Wmec [snap-in] SM Series

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
Wmec [snap-in] SM Series


>> Download Wmec [snap-in] SM Series documenatation <<

Text preview - extract from the document
ALUMINUM ELECTROLYTIC CAPACITORS

    SM Snap-in terminal Type, Standard Series
              Applicable Standard
                Characteristic W of JIS C 5141

              Operating Temperature Range
              -40~+85(6.3~250V.DC)
              -25~+85(315~450V.DC)


              Rated Working Voltage Range
                6.3~450 V.DC



              Rated Voltage and Surge Voltage
       Rated Voltage (V) 6.3     10     16        25    35     50        63 100 160 200 250 350 400 450
       Surge Voltage (V)   8     13     20        32    44     63        79 125 200 250 300 400 450 500

              DC Leakage Current
              Applying the rated DC voltage to the capacitor. The leakage current is measured
               at 5 minutes after the DC voltage across the capacitor reached the rated voltage.
              The leakage current shall not exceed the value below. (at 25)
                                                    I3CVA,
              I: Leakage Current (A) C: Nominal Capacitance (F)
                                           V: Rated Voltage (V)
              Capacitance Tolerance
              The capacitance shall be within the following tolerance to the nominal capacitance.
                                      -20%~+20% (At 25, 120Hz)
              Tangent of Loss Angle (Tan)
              Tan shall not exceed the value below. (At 25, 120Hz)
               When nominal capacitance is over 1000F. Tan shall be added 0.01 to the listed value
                with increase of every 1000F.


             Rated Voltage (V)    6.3        10        16,25        35    50,63 80,100 160~400   450

                   Tan           0.45 0.40             0.35     0.30 0.25       0.20    0.15     0.20




                    WANMING ELECTRONICS CO., LTD.                                                       PAGE: 4/9
ALUMINUM ELECTROLYTIC CAPACITORS
            Load Life
            The following specifications shall be satisfied when the capacitors are restored to 25
           after the rated voltage is applied for 2000 hours at 85.
                   Capacitance Change



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo