Service Manuals, User Guides, Schematic Diagrams or docs for : . Rare and Ancient Equipment CERN 1101701_V1_Preparation-SD22-v10
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 1101701_V1_Preparation-SD22-v10 documenatation <<Text preview - extract from the documentAB-PO-HP/gf 31.8.2007
Setup of the 22-bit Delta-Sigma converter, v. 10.1
Objective
The Delta-Sigma 22 bits, a third order modulator originally developed by John
Pett, needs a few starting up adjustments, ageing and setup. It is only carried out once and
the procedure is fully explained here. Further adjustments should not be necessary, but
are replaced by a digital calibration explained elsewhere
Tools required
This procedure requires a 10 Volts reference (Metron PBC), an oscilloscope, a
DVM (8.5 digits type HP 3458), a frequency/counter device, a soldering iron (SMD) and
a set of precision resistors (E24 / 1206, SMD) from 1 to 30 Ohms. Normal lab tools will
help, like screwdrivers and a pot-trimmer. A PC with SLAP running an FGC is
necessary for the evaluation of the 500 kHz/1 MHz output data stream.
Description of the subsystems
There are two PCBs inside the module, the power supply card and the modulator
card. The power supply provides +/-15V for the analog part, +5V for the digital control
and +/-4Vfor the Peltier element. The
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo