Service Manuals, User Guides, Schematic Diagrams or docs for : . Rare and Ancient Equipment OTARI Tape Deck MX-5050 hfe_otari_mx-5050_iv-2_biii-2_op_maintenance__4th_edition_en
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download hfe_otari_mx-5050_iv-2_biii-2_op_maintenance__4th_edition_en documenatation <<
Text preview - extract from the document
Part No. OS3-298
Lot: E
MX-5050 MKIV-2, BIII-2
MASTER TAPE RECORDER
OPERATION AND MAINTENANCE MANUAL
FOURTH EDITION
Printed: Dec 1997
Ed 4 (MA)
CAUTION
To prevent fire or shock hazard:
Do not expose this unit to rain or moisture.
Do not remove panels (unless instructed to do so).
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
PLEASE READ THROUGH THE SAFETY INSTRUCTIONS ON THE NEXT PAGE.
SAFETY INSTRUCTIONS
1. Read Instructions All the safety and operating instructions should be read before the device is
operated.
2. Retain Instructions The safety and operating instructions should be retained for future.
3. Heed Warnings All warnings on the device and in the operating instructions should be
adhered to.
4. Follow Instructions All operating and use instructions should be followed.
5. Water and Moisture The device should not be used near water -- for example, near bathtub, wash
bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
etc.
6. Carts and Stands The device should be used only with a cart or stand that is recommended by
the manufacturer.
7. Ventilation The device should be situated so that its location or position does not interfere
with its proper ventilation. For example, the device should not be situated on a
bed, sofa, rug, or similar surface that may block the ventilation openings; or,
placed in a built-in installa-tion, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.
8. Heat The device should be situated away from heat sources such as radiator, heat
registers, stoves or other appliances (including amplifiers) that produce heat.
9. Power Sources The device should be connected to a power supply only of the type described
in the operating instructions or as marked on the device.
10. Grounding or Polarization Precautions should be taken so that the grounding or polariza-tion means of
the device is not defeated.
11. Power Cord Protection Power supply cords should be routed as they are not likely to be walked on
or pinched by items placed upon or against them, paying particular attention
to cords at plugs, convenience recep-tacles, and the point where they exit
from the device.
12. Cleaning The device should be cleaned only as recommended by the manufacturer.
13. Non-Use Periods The power cord of the device should be unplugged from the out-let when left
unused for a long period of time.
14 Object and Liquid Entry Care should be taken so that objects do not fall and that liquids are not
spilled into the enclosure through openings.
15. Damage Requiring Service The device should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits marked
change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
16. Servicing The user should not attempt to service the device beyond that described in
the operating instructions. All other service should be referred to qualified
personnel.
iv
COMMUNICATION WITH OTARI
FOR SERVICE INFORMATION AND PARTS
All Otari products are manufactured under strict quality control. Each unit is carefully inspected and tested prior to
shipment.
If, however, some adjustment or technical support becomes necessary, replacement parts are required, or technical
questions arise, please contact your Otari dealer or contact Otari at:
Otari, Inc. Otari Corporation
4-33-3 Kokuryocho, Chofu-shi, 8236 Remmet Ave.
182-0022, Tokyo, Japan Canoga Park, CA 91304
Phone : (81) 42481-8626 U.S.A.
Fax : (81) 42481-8633 Phone : (818) 594-5908
Fax : (818) 594-7208
Otari Europe GmbH. Otari Singapore Pte., Ltd
Rudolf-Diesel-Stra◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo