Service Manuals, User Guides, Schematic Diagrams or docs for : . Rare and Ancient Equipment MYSTERY Car Audio Mystery DV-3200 Mystery_DV-3200

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Mystery_DV-3200


>> Download Mystery_DV-3200 documenatation <<

Text preview - extract from the document
                                                                        CONTENTS

                                                                                                                                                               Page
Disassembly Instructions ........................................................................................................................................ 3
Disassembly Diagram............................................................................................................................................. 4
Operation Check..................................................................................................................................................... 5
Block Diagram ........................................................................................................................................................ 6
Alignment Locations ............................................................................................................................................... 7
Alignment Procedures ............................................................................................................................................ 8
Printed Circuit Boards........................................................................................................................................... 10
Exploded Views (Panel)........................................................................................................................................ 20
Exploded View Parts Lists (Panel)........................................................................................................................ 21
Exploded Views (Cabinet) .................................................................................................................................... 22
Exploded View Parts Lists (Cabinet) .................................................................................................................... 23
Schematic Diagram .............................................................................................................................................. 25
Electrical Parts List ............................................................................................................................................... 30
Specifications........................................................................................................................................................ 37




                                                                                    2
                                  DISASSEMBLY INSTRUCTIONS

 1. Using the unlock key that came with the unit or a similar tool, unlock the Mounting Box and remove toward the
      rear of the unit.


 2. Remove two screws (A) located on the rear of the top cabinet then remove the Top Cabinet.


 3. Remove two screw (B) located on the rear of the bottom cabinet then remove the Bottom Cabinet.


 4. Remove the screw (C) and (D) from on the left side of the U bracket.
      Remove the screw (E) and (F) from on the right side of the U bracket.


 5. Take out the Panel and remove the Ring.


 6. Remove the screw (G) from on the front side of the base and remove two screws (H) from under the front
      deck bracket then remove the Front Deck Bracket.
      Remove two screws (I) from under the rear deck bracket then remove the Rear Deck Bracket.


 7. Remove two screws (J) from on the Heat Sink then remove the Spring Sheet.


 8.   Remove five screws (K) from on the Heat Sink then remove the Heat Sink.


 9.   Remove two screws (L) from each side of the base then remove the Base.


10. Remove two screws (M) from on the back of the U bracket then remove the DC FAN 12V.
      Remove two screws (N) from on the back of the U bracket then remove the Wire Clip.


11.   Remove three screws (O) from under the main board then remove the Main Board.




                                                         3
DISASSEMBLY DIAGRAM




         4
                                                   OPERATION CHECK

GENERAL SPECIFICATIONS OF SIGNAL

Standard frequency              FM                                 98.1 MHz (87.5, 108 MHz)
                                MW                                 1000 kHz (522, 1620 kHz)
                                LW                                 200 kHz (144, 288 kHz)
Signal output                   FM                                 1 mV
                                MW                                 5 mV
                                LW                                 5 mV
Modulation                      MW                                 400 Hz         30% MOD.
                                FM Stereo                          1 kHz          75 kHz DEV.
                                                                                  90% for L only or
                                                                                  R only pilot level 10%
AF output level                 FM/MW/LW
Power source voltage            DC 14.0V (Backup voltage is the same as this)
AF load impedance               4 ohm pure resistance
Balance                         Center position of level
Tone                            Center position
The signal strength read in this section is voltage on the antenna.
                                                              Test Diagram
                                                                                                        ACC (DV14.4V)
                    2-SPEAKER           4-SPEAKER      4-SPEAKER            2-SPEAKER
                                                              RR.
                                     RL.                      SPK.
                                     SPR.                                                             BACK UP (14.4V)
                  FRONT                                                            FRONT
                  SPK.                                                             SPK.
                                   FL.                        FR.
                                   SPK.                       SPE.                                            GROUND



                                                                                                      POWER ANTANNA




                                                                                        MAIN UNIT


                                                                                                      ANT




                                                                                                              MPX
                                                                       DUMMY                                  STEREOS
                           DISTORTION                                  ANTANNA                                MODULATOR
                           METER            VTVM       VTVM




                                                                       AM SG                  FM SG




                                                               5
BLOCK DIAGRAM (RADIO SECTION)




              6
BLOCK DIAGRAM (DVD SECTION)




             7
                ALIGNMENT LOCATIONS



MITSUMI TUNER




                         8
                                      ALIGNMENT PROCEDURES

FM ADJUSTMENT

Equipment Required


  AM IF/RF signal generator
  Solid-state voltmeter (SSVM)
  Regulated DC power supply
  2-CH voltmeter
  Distortion meter


FM Alignment Using FM Signal Generator


Note: Press the radio power switch to on the radio. Signal generator output must be kept as low as possible
       to avoid overload and clipping.


Step                   Generator           Generator        Display    Adjustment          Remarks
                        Coupling                            Setting
Stereo             Signal                98.1 MHz                                     Adjust AF
Separation         Generator             Int. 1 kHz         98.1 MHz     VR1          output power
                   to antenna            Dev. 75 kHz                                  at maximum
                   receptacle            L+R = 90 %                                   separating
                                         pilot = 10 %                                 more than 30 dB
FM SNC             98.1 MHz
Adjustment         Dev. 75 kHz           98.1 MHz           98.1 MHz     VR2          Stereo Separation
                   L+R=90 %              @ 40 dB



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo