Global LCD Panel Exchange Center www.panelook.com
Document Version: 2.3
Date: 2005/10/13
Product Specifications
26.0" WXGA Color TFT-LCD Module
Model Name: T260XW02
(*) Preliminary Specifications
( ) Final Specifications
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 1/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Contents
No ITEM
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTION MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATIONS
3-4 SIGNAL TIMING WAVEFORMS
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE
4 OPTICAL SPECIFICATIONS
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY
7 INTERNATIONAL STANDARDS
7-1 SAFETY
7-2 EMC
8 PACKING
9 PRECAUTIONS
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 2/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Date No Old Description New Description Remark
0 6/14 `05 Original version
Optical Specification:
Optical Specification:
2.1 7/13 `05 Response time Rise time: TrR=12ms Page 15
Response time Rise time: TrR=8ms
Decay time:
Decay time: TrD=8ms
TrD=12ms
Mechanical Characteristics: Mechanical Characteristics:
2.2 8/17 `05 Bezel Area Horizontal=580.0mm Bezel Area Horizontal=580.8mm Page 18
Vertical=328.0mm Vertical=328.8mm
2. Absolute Maximum Ratings
2. Absolute Maximum Ratings Symbol: VDDB
Symbol: VDD Note 1 : Duration = 1 sec
Symbol Min Max Unit
Note1: Duration = 50msec V -0.3 (6.0) [Volt] CC
Symbol Min Max Unit VLVDSOPT -0.3 (3.6) [Volt]
VCC -0.3 (7.0) [Volt]
Vin -0.3 (3.6) [Volt]
VDDB
BLON
-0.3
-0.3
27.0
7.0
[Volt]
[Volt]
Page 5
VDDB -0.3 27.0 [Volt]
VDIM -0.3 6.0 [Volt]
BLON -0.3 7.0 [Volt]
o VBLON -0.3 6.0 [Volt]
TOP 0 +50 [ C]
EVPWM -0.3 6.0 [Volt]
HOP 10 90 [%RH] o
TST -20 +60
o
[ C] TOP 0 +50 [ C]
HST 10 90 [%RH] HOP 10 90 [%RH]
o
TST -20 +60 [ C]
HST 10 90 [%RH]
** LVDS Option : ** LVDS Option :
H (3.3V) or N.C. NS (Normal) H (3.3V) or N.C. NS (Normal)
L (GND) JETDA L (GND) JETDA
** Rotate Option : H (3.3V) U/D, Page 7, 8
R/L rotate
L (GND) Normal
Input Current Input Current (Turn on Condition)
2.3 10/13 `05 IDDB=3.95A(max.) IDDB=3.65A(typ.)
Input Power IDDB=3.95A(max.)
P DDB =85W(max.) Input Power (Turn on Condition)
P DDB=87.6W(typ.)
P DDB=94.8W(max.)
Page 9
Input Current (Stable Condition)
IDDB=3.5A(typ.)
IDDB=3.6A(max.)
Input Power (Stable Condition)
P DDB=84W(typ.)
P DDB=87W(max.)
Signal Item Symbol Min. Typ. Max. Unit Signal Item Symbol Min. Typ. Max. Unit
Period Tv 789 806 822 Th Period Tv 950 975 1000 Th
Vertical Vertical
Section Active Tdisp 768 Th Section Active Tdisp 768
Blanking Tblk (v) 21 38 54 Th Blanking Tblk (v) 182 207 232 Th
Period Th 1414 1560 1722 Tclk Period Th 1414 1435 1543 Tclk
Horizontal Horizontal
Section
Active
Blanking
Tdisp
Tblk (h) 48
1366
194 356
Tclk
Tclk
Section Active Tdisp
Blanking Tblk (h) 48
1366
69 177 Tclk
Page 11
Clock Frequency Fclk 65 76 88 MHz Clock Frequency Fclk 80 84 88 MHz
Vertical Vertical
Frequency Fv 58 60 62 Hz Frequency Fv -- 60 -- Hz
Frequency Frequency
Horizontal Horizontal
Frequency Freq 47.32 --- 49.32 kHz Frequency Freq 57 --- 60 kHz
Frequency Frequency
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 3/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. General Description
This specification applies to the 26.0 inch Color TFT-LCD Module T260XW02. This LCD module has a TFT
active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 26.0 inch. This module supports
1366x768 XGA-WIDE mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray
scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T260XW02 has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are
very important.
* General Information
Items Specification Unit Note
Active Screen Size 26.0 inches
Display Area 575.769 (H) x 323.712(V) mm
Pixel Pitch 0.4215 mm
Outline Dimension 626.0 (H) x 373.0 (V) x 47.5(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
BL Structure 8 U-Lamps
Surface Treatment AG, 3H
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 4/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VCC -0.3 (6.0) [Volt] Note 1
LVDS Option Control Voltage VLVDSOPT -0.3 (3.6) [Volt] Note 1
BLU Input Voltage VDDB -0.3 27.0 [Volt] Note 1
BLU Brightness Control Voltage BLON -0.3 7.0 [Volt] Note 1
External Analog Dimming Control Voltage VDIM -0.3 6.0 [Volt] Note 1
On/Off Control Voltage VBLON -0.3 6.0 [Volt] Note 1
External PWM Dimming Control Voltage EVPWM -0.3 6.0 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
Storage Temperature TST -20 +60 [oC] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Note 1 : Duration = 1sec
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 5/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Specification
The T260XW02 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input power for the BLU, is to power inverter..
3-1 Electrical Characteristics
Values
Parameter Symbol Unit Notes
Min. Typ. Max.
LCD:
Power Supply Input Voltage Vcc 4.5 5.0 5.5 V
Power Supply Input Current Icc - 1.40 1.78 A 1
Power Consumption Pc - 7.0 9.0 Watt 1
Inrush Current IRUSH - - 3.0 A 2
Backlight Power Consumption - - 94.8 Watt 3
Life Time 50,000 60,000 Hours 4
Note :
1. Vcc=5.0V, Fv=60Hz, Fclk= 85.0 MHz , 25 .
2. Vcc rising time = 470 s , Vcc=5.0V
3. The performance of the Lamp in LCM, for example: lifetime or brightness, is extremely influenced by the characteristics
of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed so as not to produce too much
leakage current from high-voltage output of the inverter. When you design or order the inverter, please make sure
unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you
confirm it, the LCD Assembly should be operated in the same condition as installed in your instrument.
4. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD Module
have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and
conducting tape.
5. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At temperatures greater than
40 , the wet bulb temperature must not exceed 39 . When operate at low temperatures, the brightness of CCFL will
drop and the lifetime of CCFL will be reduced.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 6/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-2 Interface Connections
- LCD connector (CN1): JAE FI-E30S or equivalent
- Mating Connector:
- LVDS Transmitter: SN75LVDS83(Texas Instruments) or equivalent
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD's metal frame. All Vcc
(power input) pins should be connected together.
Pin No Symbol Description Default
1 N.C. No Connection ( Auo internal Test Pin)
2 N.C. No Connection ( Auo internal Test Pin)
3 N.C. No Connection ( Auo internal Test Pin)
4 GND Power Ground
5 Rx0- Negative LVDS differential data input
6 Rx0+ Positive LVDS differential data input
7 GND Power Ground
8 Rx1- Negative LVDS differential data input
9 Rx1+ Positive LVDS differential data input
10 GND Power Ground
11 Rx2- Negative LVDS differential data input
12 Rx2+ Positive LVDS differential data input
13 GND Power Ground
14 RxCLK- Negative LVDS differential clock input
15 RxCLK+ Positive LVDS differential clock input
16 GND Power Ground
17 Rx3- Negative LVDS differential data input
18 Rx3+ Positive LVDS differential data input
19 GND Power Ground
20 N.C. No Connection ( Auo internal Test Pin)
21 LVDS Option Pull Low : JETDA LVDS format; Pull High or N.C.: NS LVDS format
22 N.C. No Connection ( Auo internal Test Pin)
23 GND Power Ground
24 GND Power Ground
25 GND Power Ground
26 VCC +5V Power Input
27 VCC +5V Power Input
28 VCC +5V Power Input
29 VCC +5V Power Input
30 VCC +5V Power Input
** LVDS Option : H (3.3V) or N.C. NS
L (GND) JETDA
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 7/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LVDS Option = L (GND) JETDA Format
Previous Cycle Current Cycle Next Cycle
Clock
RIN0+ R3 R2 G2 R7 R6 R5 R4 R3 R2 G2
RIN0-
RIN1+ G4 G3 B3 B2 G6 G6 G5 G4 G3 B3
RIN1-
RIN2+ B5 B4 DE NA NA B7 B6 B5 B4 DE
RIN2-
RIN3+ R1 R0 NA B1 B0 G1 G0 R1 R0 NA
RIN3-
LVDS Option = H (3.3V) or N.C. NS Format
Previous Cycle Current Cycle Next Cycle
Clock
RIN0+ R1 R0 G0 R5 R4 R3 R2 R1 R0 G0
RIN0-
RIN1+ G2 G1 B1 B0 G5 G4 G3 G2 G1 B1
RIN1-
RIN2+
B3 B2 DE NA NA B5 B4 B4 B2 DE
RIN2-
RIN3+ R7 R6 NA B7 B6 G7 G6 R7 R6 NA
RIN3-
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 8/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
BACKLIGHT CONNECTOR PIN CONFIGURATION
1. Electrical specification
(Ta=25 5 )
No ITEM SYMBOL CONDITION MIN TYP MAX UNIT Note
1 Input Voltage VDDB --- 21.6 24.0 26.4 V
V DDB=24V
VDIM=3.3V
2 Input Current (Turn on Condition) IDDB --- 3.65 3.95 A 1
EDPWM=100
%
V DDB=24V
3 Input Power (Turn on Condition) P DDB VDIM=3.3V --- 87.6 94.8 W 1
EDPWM=100%
V DDB=24V
4 Input Current (Stable Condition) IDDB VDIM=3.3V --- 3.5 3.6 A 1
EDPWM=100%
V DDB=24V
5 Input Power (Stable Condition) P DDB VDIM=3.3V --- 84 87 W 1
EDPWM=100%
V DD=24V
6 Input inrush current, 0.3ms IRUSH VDIM=3.3V --- --- 5.0 A
EDPWM=100%.
7 Output Frequency FBL V DD=24V --- 48 --- kHz
ON V DD=24V 2.0 --- 5.0 V or Open
8 ON/OFF Control Voltage V BLON
OFF V DD=24V 0.0 --- 0.8 V
9 ON/OFF Control Current IBLON V DD=24V -1 --- 1.5 mA
MAX V DD=24V --- 3.3 --- V or Open
10 Dimming Control Voltage VDIM
MIN V DD=24V --- 0.0 --- V
11 Dimming Control Current IDIM MIN V DD=24V 1.0 --- mA
MAX --- 2.0 --- 5.0 V
12 External PWM Control Voltage EVPWM
MIN --- -0.3 --- 0.8 V
MAX PWM=100% 0.5 --- --- mA
13 External PWM Control Current EIPWM
MIN PWM=100% 0.5 --- --- mA
14 External PWM Duty Ratio ED PWM --- 30 --- 100 %
15 External PWM Frequency EFPWM --- 150 --- 300 Hz
Note1:
4500.0
4000.0
3500.0
3000.0
Iin[mA]
2500.0
2000.0 Turn ON Condition Stable Condition
1500.0
1000.0
500.0
0.0
0 600 1200 1800 2400 3000 3600
Time[sec]
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 9/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Input specification
Pin No Symbol Description Default
1 VDD Operating Voltage Supply, +24V DC regulated 24V
2 VDD Operating Voltage Supply, +24V DC regulated 24V
3 VDD Operating Voltage Supply, +24V DC regulated 24V
4 VDD Operating Voltage Supply, +24V DC regulated 24V
5 VDD Operating Voltage Supply, +24V DC regulated 24V
6 GND Ground GND
7 GND Ground GND
8 GND Ground GND
9 GND Ground GND
10 GND Ground GND
11 VDIM External Analog Dimming Control -
12 VBLON On/Off Control -
13 EXPWM External PWM Dimming Control -
14 N.C. No Connection -
CN1: S14B-PH-SM3-TB(JST) or Compatible CN2: S2B-ZR-SM3A-TF(JST) or Compatible
CN3~10: SM02(12)B-BHS-1-TB(JST) or Compatible
3. Backlight Diagram
HOT: High Voltage
HOT 1(PINK)
HOT 2(WHITE)
HOT 3(PINK)
HOT 4(WHITE)
HOT 13(PINK)
HOT 14(WHITE)
HOT 15(PINK)
HOT 16(WHITE)
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 10/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-3 Signal Timing Specifications
This is the signal timing required at the input of the User connector. All of the interface signal timing should
be satisfied with the following specifications for it's proper operation.
* Timing Table
DE only Mode
Vertical Frequency Range A
Signal Item Symbol Min. Typ. Max. Unit
Period Tv 789 806 822 Th
Vertical
Section Active Tdisp 768 Th
Blanking Tblk (v) 21 38 54 Th
Period Th 1414 1560 1722 Tclk
Horizontal
Active Tdisp 1366 Tclk
Section
Blanking Tblk (h) 48 194 356 Tclk
Clock Frequency Fclk 54 63 74 MHz
Vertical
Frequency Fv 48 50 52 Hz
Frequency
Horizontal
Frequency Freq 39.45 --- 41.10 kHz
Frequency
Vertical Frequency Range B
Signal Item Symbol Min. Typ. Max. Unit
Period Tv 950 975 1000 Th
Vertical
Section Active Tdisp 768
Blanking Tblk (v) 182 207 232 Th
Period Th 1414 1435 1543 Tclk
Horizontal
Active Tdisp 1366
Section
Blanking Tblk (h) 48 69 177 Tclk
Clock Frequency Fclk 80 84 88 MHz
Vertical
Frequency Fv -- 60 -- Hz
Frequency
Horizontal
Frequency Freq 57 --- 60 kHz
Frequency
*1) DCLK signal input must be valid while power supply is applied.
*2) Display position is specific by the rise of ENAB signal only.
Horizontal display position is specified by the falling edge of 1st DCLK right after the rise of ENAB, is
displayed on the left edge of the screen.
Vertical display position is specified by the rise of ENAB after a "Low" level period equivalent to eight times
of horizontal period. The 1st data corresponding to one horizontal line after the rise of ENAB is displayed at
the top line of screen.
*3.) If a period of ENAB "High" is less than 1366 DCLK or less than 768 lines, the rest of the screen
displays black.
*4.) The display position does not fit to the screen if a period of ENAB "High" and the effective data period
do not synchronize with each other.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 11/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-4 Signal Timing Waveforms
RGB Data
CLK
DE
RGB
Data
DE
Line
768
1366
Pixel
Tclk
Invalid Data
Invalid Data
Line
Th
1
Pixel
1
Pixel
2
Tv
Line
2
Pixel
3
Pixel
4
Tdisp(h)
Line
3
Pixel
Th
5
Tdisp(v)
Pixel
6
Line
4
1366
Pixel
Line
768
Invalid Data
Invalid Data
Pixel
1
Pixel
2
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 12/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the
color; the higher the binary input, the brighter the color. The table below provides a reference for color versus
data input.
COLOR DATA REFERENCE
Input Color Data
Color RED GREEN BLUE
MSB LSB MSB LSB MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Color Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED ----
RED(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
GREEN ----
GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE -------
BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 13/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-6 Power Sequence
Values
Parameter Units
Min. Typ. Max.
t1 470 - 1000 s
t2 25 - 60 ms
t3 600 - - ms
t4 200 - - ms
t5 50 - - ms
t6 0.47 - 30 ms
t7 1 - - s
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 14/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. Optical Specification
Optical characteristics are determined after the unit has been `ON' and stable for approximately 45 minutes in
a dark environment at 25 . The values specified are at an approximate distance 50cm from the LCD surface
at a viewing angle of and equal to 0 .
Fig.1 1 presents additional information concerning the measurement equipment and method.
Parameter Symbol Values Units Notes
Min. Typ. Max.
Contrast Ratio CR 600 800 1
Dark Luminance LBK 0.8 cd/
2
Surface Luminance, white LWH 400 500 cd/
Luminance Variation
WHITE 9 p 1.3 3
Response Rise Time TrR 15 18
ms 4
Time Decay Time TrD 5 7
Gray to Gray T 8 35 ms 5
Color Coordinates
RX 0.640
RED
RY 0.330
GX 0.290
GREEN
GY 0.600
Typ.-0.03 Typ.+0.03
BX 0.150
BLUE
BY 0.060
WX 0.280
WHITE
WY 0.290
Viewing Angle
x axis, right( =0 ) r 88 Degree
x axis, left( =180 ) l 88 Degree 6
y axis, up( =90 ) u 88 Degree
y axis, down ( =0 ) d 88 Degree
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 15/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note:
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance of Lon1
Contrast Ratio=
Surface Luminance of Loff1
2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all pixels displaying white.
From more information see FIG 2. When VDDB = 24V, IDDB = 3.5A. LWH=Lon1
Where Lon1 is the luminance with all pixels displaying white at center 1 location.
3. The variation in surface luminance,
WHITE is defined (center of Screen) as:
WHITE(9P)= Maximum(Lon1, Lon2,...Lon9) / Minimum(Lon1, Lon2,...,Lon9)
4. Response time is the time required for the display to transition from black to white(Rise Time, Tr R) and from white to black
(Decay Time, TrD). For additional information see FIG3.
5. T is the response time between any two gray scale and is based on f v=60Hz to optimize.
6. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis
and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG4.
V
FIG. 2 Luminance
H/2 1 2 3
4 5 6 H
7 8
H/6
V/6 V/2
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 16/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
FIG.3 Response Time
The response time is defined as the following figure and shall be measured by switching the input signal for
"black" and "white".
Any brighter gray level (White) Any brighter gray level (White)
100%
90%
Optical
Response
n
a
n
c
e
Any darker gray (Black)
10%
0
TrD TrR Time
FIG.4 Viewing angle
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 17/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model T260XW02. In addition the figures in
the next page are detailed mechanical drawing of the LCD.
Horizontal 626.0mm
Outline Dimension Vertical 373.0mm
47.5mm(w/i inverter & Shielding)
Depth
30.3mm(w/o inverter)
Horizontal 580.8mm
Bezel Area
Vertical 328.8mm
Horizontal 575.769mm
Active Display Area
Vertical 323.712mm
Weight 4200g (Typ.)
Surface Treatment Anti-Glare, 3H
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 18/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Front View
1. l C-D l<1.6mm
2. l E-F l<1.6mm
notes:
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 19/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Rear View
1. l C-D l<1.6mm
2. l E-F l<1.6mm
notes:
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 20/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6. Reliability
Environment test condition
No Test Item Condition
1 High temperature storage test Ta=60 240h
2 Low temperature storage test Ta=-20 240h
3 High temperature operation test Ta=50 80%RH 240h
4 Low temperature operation test Ta=0 240h
Wave form: random
Vibration level: 1.0G RMS
Vibration test
5 Bandwidth: 10-500Hz
(non-operating)
Duration: X, Y, Z 20min
One time each direction
Shock level: 100G
Shock test Waveform: half since wave, 2ms
6
(non-operating) Direction: X, Y, Z
One time each direction
Vibration test Random Vibration: 10~200Hz, 1.5G, 30minutes
7
(with carton) in each X, Y, Z direction
Height: 53.3cm
Drop test
8 1 corner, 3 edges, 6 surfaces
(with carton)
(ASTMD4169-I)
Altitude
9 50,000 feet (12Kpa)
Storage/shipment
Result Evaluation Criteria
There should be no change which might affect the practical display function when the display quality test is
conducted under normal operating condition.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 21/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. International Standard
7-1. Safety
(1) UL1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995
Standard for Safety of Information Technology Equipment Including electrical Business Equipment.
(2) CAN/CSA C22.2 No. 950-95 Third Edition, Canadian Standards Association, Jan. 28, 1995
Standard for Safety of Information Technology Equipment Including Electrical Business Equipment.
(3) EN60950 : 1992+A2: 1993+A2: 1993+C3: 1995+A4: 1997+A11: 1997
IEC 950: 1991+A1: 1992+A2: 1993+C3: 1995+A4:1996
European Committee for Electrotechnical Standardization (CENELEC)
EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical
Business Equipment.
7-2. EMC
a) ANSI C63.4 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical
and Electrical Equipment in the Range of 9kHz to 40GHz. "American National standards
Institute(ANSI), 1992.
b) C.I.S.P.R "Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment." International Special committee on Radio Interference.
c) EN 55022 "Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment." European Committee for Electrotechnical Standardization. (CENELEC),
1998.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 22/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
8. Packing
Label sample 83mm * 23mm
Carton Label
AU Optronics QTY: 4
MODEL NO: T260XW02 VX
PART NO: 97.26T02.XXX
CUSTOMER NO:
CARTON NO:
Made in Taiwan *PM100-01A1600001*
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T260XW02 V2-Spec. Ver2.3 23/26
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Carton Size 767(L)mm*330(W)mm*480(H)mm
4pcs Modules
Cushion top
Cushion set