Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_T315HW02_V0_1_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_AUO_T315HW02_V0_1_[DS]](/pics/5c36b46d5d6f5.gif)
>> Download Panel_AUO_T315HW02_V0_1_[DS] documenatation <<
Text preview - extract from the document
Product Description: T315HW02 TFT-LCD PANEL with RoHS guarantee
AUO Model Name: T315HW02 V0
Customer Part No/Project Name:
Customer Signature Date AUO 2008/09/10
Approved By: PM Director / Frank Hsu
Reviewed By: RD Director / Hong Hong Jye
Reviewed By: Project Leader / Jr Chiou
Prepared By: PM / Hanson Wang
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
1/27
No Reproduction and Redistribution Allowed
Document Version : 0.0
Date : 2008/9/10
Product Specifications
31.5" FHD Color TFT-LCD Module
Model Name: T315HW02 V0
(*) Preliminary Specifications
() Final Specifications
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
2/27
No Reproduction and Redistribution Allowed
Contents
No
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
4 BACKLIGHT CONNECTOR PIN CONFIGURATIO
5 OPTICAL SPECIFICATIONS
6 MECHANICAL CHARACTERISTICS
7 RELIABLITY
8 INTERNATIONAL STANDARDS
9 PACKING
10 PRECAUTIONS
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
3/27
No Reproduction and Redistribution Allowed
Record of Revision
Version Date No Old Description New Description Remark
0 2007/12/26 First issue
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
4/27
No Reproduction and Redistribution Allowed
1. General Description
This specification applies to the 31.5 inch Color TFT-LCD Module T315HW02 V0. This LCD
module has a TFT active matrix type liquid crystal panel 1920x1080 pixels, and diagonal size of
31.5 inch. This module supports 1920x1080 HDTV mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale
signal for each dot.
The T315HW02 V0 has been designed to apply the 8-bit 1 channel LVDS interface method. It is
intended to support displays where high brightness, wide viewing angle, high color saturation, and
high color depth are very important.
The T315HW02 V0 model is RoHS verified which can be distinguished on panel label.
* General Information
Items Specification Unit Note
Active Screen Size 31.51 inches
Display Area 698.4 (H) x 392.85 (V) mm
Outline Dimension 760.0(H) x 450.0(V) x 45(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1920x1080 Pixel
Pixel Pitch 0.36375 mm
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Surface Treatment AG, 3H Haze = 11
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
5/27
No Reproduction and Redistribution Allowed
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause permanent damage to the unit.
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1
BLU Input Voltage VDDB -0.3 28 [Volt] Note 1
BLU Brightness Control Voltage Vdim -0.3 7.0 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
o
Panel Surface Temperature PST 65 [ C]
Note 1: Duration:50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures greater
than 40 , the wet bulb temperature must not exceed 39 .
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
6/27
No Reproduction and Redistribution Allowed
3. Electrical Specification
The T315HW02 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal. The second input power for the BLU, is to power inverter..
3-1 Electrical Characteristics
Parameter Values
Unit Notes
Min Typ Max
CD:
Power Supply Input Voltage Vcc 10.8 12 13.2 Vdc 1
Power Supply Input Current Icc - 0.65 0.75 A 2
Power Consumption Pc - 7.8 9 Watt 2
Inrush Current IRUSH - - 6 Apeak 3
Differential Input High Threshold
VTH 100 mV 4
Voltage
LVDS
Differential Input Low Threshold
Interface VTL 100 mV 4
Voltage
Common Input Voltage VCIM 1.10 1.25 1.40 V 4
VIH
Input High Threshold Voltage 2.4 3.3 Vdc
CMOS (High)
Interface VIL
Input Low Threshold Voltage 0 0.7 Vdc
(Low)
Backlight Power Consumption PDDB 63.5 67 70.5 Watt
Life Time 50,000 Hours 6
Note :
1. The ripple voltage should be controlled under 10% of VCC
2. Vcc=12.0V, f v = 60Hz, fCLK=81.5Mhz , 25 , Test Pattern : White Pattern
3. Measurement condition :
VCC
%09
%01
GND
Su 074 = hsurT
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
7/27
No Reproduction and Redistribution Allowed
4. VCIM = 1.2V
VTH
VCIM
VIL
0V
5. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD
Module have a low luminance and the inverter has abnormal action because leakage current occurs between
lamp wire and conducting tape.
6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At temperatures
greater than 40
, the wet bulb temperature must not exceed 39 . When operate at low temperatures, the
brightness of CCFL will drop and the life time of CCFL will be reduced.
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
8/27
No Reproduction and Redistribution Allowed
3-2 Interface Connections
- Connector on Panel: JAE FI-RE51S-HF (Manufactured by JAE)
-
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD's metal frame.
All Vcc (power input) pins should be connected together.
2. For Pin 10, 27 and 28, panel will not damage if negligently connect these pins to high or low
LVDS Option = High/Open, NS mode
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
9/27
No Reproduction and Redistribution Allowed
ORXCLK+
ORXCLK-
ORX0 OR0 OG0 OR5 OR4 OR3 OR2 OR1 OR0 OG0
ORX1 OG1 OB1 OB0 OG5 OG4 OG3 OG2 OG1 OB1
ORX2 OB2 DE VS HS OB5 OB4 OB3 OB2
ORX3 OR6 OB7 OB6 OG7 OG6 OR7 OR6
ERXCLK+
ERXCLK-
ERX0 ER0 EG0 ER5 ER4 ER3 ER2 ER1 ER0 EG0
ERX1 EG1 EB1 EB0 EG5 EG4 EG3 EG2 EG1 EB1
ERX2 EB2 DE VS HS EB5 EB4 EB3 EB2 DE
ERX3 ER6 EB7 EB6 EG7 EG6 ER7 ER6
Note:
Odd data is the first priority.
First data is odd.
LVDS Option = Low (0V) , JEIDA mode
ORXCLK+
ORXCLK-
ORX0 OR2 OG2 OR7 OR6 OR5 OR4 OR3 OR2 OG2
ORX1 OG3 OB3 OB2 OG7 OG6 OG5 OG4 OG3 OB3
ORX2 OB4 DE VS HS OB7 OB6 OB5 OB4
ORX3 OR0 OB1 OB0 OG1 OG0 OR1 OR0
ERXCLK+
ERXCLK-
ERX0 ER2 EG2 ER7 ER6 ER5 ER4 ER3 ER2 EG2
ERX1 EG3 EB3 EB2 EG7 EG6 EG5 EG4 EG3 EB2
ERX2 EB4 DE VS HS EB7 EB6 EB5 EB4 DE
ERX3 ER0 EB1 EB0 EG1 EG0 ER1 ER0
Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315HW02 V0 - Spec. Ver 0.0
10/27
No Reproduction and Redistribution Allowed
4. BACKLIGHT CONNECTOR PIN CONFIGURATION -
4-1 Electrical specification
Note1 : VDIM= 3.3V (MAX)
Ta=25◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo