Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 13.3" WXGA TFT LCD
BUYER General SUPPLIER LG.Philips LCD Co., Ltd.
MODEL *MODEL LP133WX2
Suffix TLCA
*When you obtain standard approval,
please use the above model name without suffix
APPROVED BY SIGNATURE
APPROVED BY SIGNATURE
K. K. Jang / S.Manager
/ REVIEWED BY
N. J. Seong / Manager
/
PREPARED BY
/
G. W. Do / Engineer
Product Engineering Dept.
Please return 1 copy for your confirmation with LG. Philips LCD Co., Ltd
your signature and comments.
Ver. 1.0 April, 2, 2007 0/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
Contents
No ITEM Page
COVER
CONTENTS 1
RECORD OF REVISIONS 2
1 GENERAL DESCRIPTION 3
2 ABSOLUTE MAXIMUM RATINGS 4
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTREISTICS 5
3-2 INTERFACE CONNECTIONS 6
3-3 SIGNAL TIMING SPECIFICATIONS 8
3-4 SIGNAL TIMING WAVEFORMS 8
3-5 COLOR INPUT DATA REFERNECE 9
3-6 POWER SEQUENCE 10
4 OPTICAL SFECIFICATIONS 11
5 MECHANICAL CHARACTERISTICS 15
6 RELIABLITY 18
7 INTERNATIONAL STANDARDS
7-1 SAFETY 19
7-2 EMC 19
8 PACKING
8-1 DESIGNATION OF LOT MARK 20
8-2 PACKING FORM 20
9 PRECAUTIONS 21
A APPENDIX A. Enhanced Extended Display Identification Data 23
Ver. 1.0 April, 2, 2007 1/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
RECORD OF REVISIONS
EDID
Revision No Revision Date Page Description
ver
1.0 28. Nov. 2007 - Final CAS V1.0
Ver. 1.0 April, 2, 2007 2/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
1. General Description
The LP133WX2 is a Color Active Matrix Liquid Crystal Display with an integral LED backlight system. The
matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in
the normally white mode. This TFT-LCD has 13.3 inches diagonally measured active display area with
WXGA resolution(1280 horizontal by 800 vertical pixel array). Each pixel is divided into Red, Green and
Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel
color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than
262,144 colors.
The LP133WX2 has been designed to apply the interface method that enables low power, high speed, low
EMI.
The LP133WX2 is intended to support applications where thin thickness, low power are critical factors and
graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the
LP133WX2 characteristics provide an excellent flat display for office automation products such as Notebook
PC.
'
General Features
Active Screen Size 13.3 inches diagonal
Outline Dimension 297.15 (H) 192.15 (V) 3.5(D, Max.) mm
Pixel Pitch 0.2235 mm 0.2235 mm
Pixel Format 1280 horiz. by 800 vert. Pixels RGB strip arrangement
Color Depth 6-bit, 262,144 colors
Luminance, White 275 cd/m2(Typ., @ILED=19mA)
Power Consumption Logic : 1.1W(typ.@Mosaic), Back Light : 3.42W(typ.@ ILED= 19mA)
Weight 285(Max.)
Display Operating Mode Transmissive mode, normally white
Surface Treatment Hard coating(3H), Glare treatment of the front Polarizer (Haze 0%)
Ver. 1.0 April, 2, 2007 3/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. ABSOLUTE MAXIMUM RATINGS
Values
Parameter Symbol Units Notes
Min Max
Power Input Voltage VCC -0.3 4.0 Vdc at 25 r 5qC
Operating Temperature TOP 0 50 qC 1
Storage Temperature HST -20 60 qC 1
Operating Ambient Humidity HOP 10 90 %RH 1
Storage Humidity HST 10 90 %RH 1
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39qC Max, and no condensation of water.
90% 80%
60 60%
Wet Bulb 50
Humidity[(%)RH]
Temperature [ ] Storage
40 40%
30 Operation
20
20%
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [ ]
Ver. 1.0 April, 2, 2007 4/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
The LP133WX2 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input which powers the LED BL.
Table 2. ELECTRICAL CHARACTERISTICS
Values
Parameter Symbol Unit Notes
Min Typ Max
MODULE :
Power Supply Input Voltage VCC 3.0 3.3 3.6 VDC
Power Supply Input Current ICC - 325 374 mA 1
Power Consumption Pc - 1.1 1.24 Watt 1
Differential Impedance Zm 90 100 110 Ohm 2
LED Backlight :
Operating Current per string ILED 5 19 20 mA 3
Power Consumption PBL - 3.42 3.77 Watt 4
Life Time 10,000 - - Hrs 5
Note)
1. The specified current and power consumption are under the Vcc = 3.3V , 25 , fv = 60Hz condition
whereas mosaic pattern is displayed and fv is the frame frequency.
2. This impedance value is needed to proper display and measured form LVDS Tx to the mating connector.
3. The typical operating current is for the typical surface luminance (LWH) in optical characteristics.
ILED is the current of each LEDs' string, LED backlight has 6 strings on it.
4. The LED power consumption shown above does not include power of external LED driver circuit
for typical current condition.
5. The life time is determined as the time at which brightness of LED is 50% compare to that of typical value
at the typical LED current.
Ver. 1.0 April, 2, 2007 5/ 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LP133WX2
Liquid Crystal Display
Product Specification
3-2. Interface Connections
This LCD employs two interface connections, a 30 pin connector is used for the module electronics interface
and the other connector is used for the integral backlight system.
The electronics interface connector is a model 20347-330E-12 manufactured by I-PEX.
Table 3. MODULE CONNECTOR PIN CONFIGURATION (CN1)
Magnachip, D10D40T641L
I-PEX 20347-330E