Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_LG-Philips_LCD_LP141WP1-TLA1_0_[DS]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download Panel_LG-Philips_LCD_LP141WP1-TLA1_0_[DS] documenatation <<

Text preview - extract from the document

Global LCD Panel Exchange Center www.panelook.com

Module

MODEL : LP141WP1 - TLA1 [ Lead Free ]
CAUTION
BEFORE SERVICING THE MODULE, READ THE SAFETY PRECAUTIONS
IN THIS MANUAL.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

SAFETY PRECAUTIONS

Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
LCD Module is a display device to be divided into Board Ass'y and Backlight Ass'y. Board Ass'y consists of electric circuitry,
PCB and two sheets of glass. Polarizer films are attached on each surface. The space between two sheets of glass are filled
with Liquid Crystal. And the Backlight Ass'y includes Lamp Ass'y, optical sheets(Diffuser, Prism), LGP(Light Guide Panel),
supporter main.
When using / handing this LCD Module, pay attention to the below warning and cautions.

(3) Do not install or use the product in a location that dose not
satisfy the specified environmental conditions. This may
Warning? damage the product and may cause a fire.

Warning statements identify conditions or
(4) If a foreign substance (such as water, metal, or liquid)gets
practices that could result in injury or loss of life
inside the product, immediately turn off the power.
if the warning is ignored and the product is
Continuing to use the product and cause fire or electric
handled incorrectly.
shock.

(5) If the product emits smoke or abnormal noise, immediately
turn off the power. Continuing to use the product cause fire
Caution? or electric shock.

Caution statements identify conditions or
(6) Do not disconnect or connect the connector while the
practices that could result in damage to this
power is on.
product or other property if the caution is
ignored and the product is handled
(7) Do not pull out or insert the power cable from/to an outlet
incorrectly.
with wet hands. It may cause electric shock.

(8) If the power cable is damaged or the connector is loose, do
not use the product : otherwise this can lead to fire or
electric shock.
WARNING
(9) Backlight Inverter uses a high voltage for Lamp. Do not
(1) Do not supply a voltage higher than that specified to this touch circuit substrate and caution on electric shock when
product. This may damage the product and may cause a handling the LCD Module Backlight Inverter unit.
fire.

(2) Do not use this product in locations where the humidity is
extremely high, where it may be splashed with water, or
where flammable materials surround it.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
Korean
CAUTION
(9) LCD Module emits heat from the Lamp, Backlight lamp,
(1) Do not place this product in a location that is subject to component parts. Therefore, the environmental
heavy vibration, or an unstable surface such as an inclined temperature must not exceed 50 . LCD Module Backlight
surface. The product may fall off or fall over, causing Inverter system is driven by high voltage, so it must avoid
injuries. conductive materials.

(2) Before disconnecting cable from the product, be sure to (10) If repairing components with a lead line, high voltage or
turn off the power. Be sure to hold the connector when high temperature components must be put out from a
disconnecting cables. Pulling a cable with excessive force lead line and fix.
may cause the core of the cable to be exposed or break
the cable, and this can lead to fire or electric shock. (11) Do not place an object on the surface of the display. The
glass may break or be scratched.
(3) This product contains glass. If shock, vibration, heat or
distortion is applied to the product, the glass may be broken. (12) This product may be damaged if it is subject to excessive
stresses (such as excessive voltage, current, or
(4) If glass surface of the display breaks or is scratched, do temperature). The absolute maximum ratings specify the
not touched the broken pieces or the scratched with bare limits of these stresses.
hands. You may be injured.
(13) Do not cover or wrap with any covering materials while
(5) LCD Module requires to be handled with special care. LCD power is applied to the product.
Module is not to be touched with metal or hard materials.
Must not be stressed by heat or mechanical impact. (14) This product is made from various material such as glass,
metal, and plastic. When discarding it, be sure to contact
(6) There are some particular components on the rear panel of a purchase place.
this product. Skin contact with these components may
cause an electric shock. So, handle with care. (15) If a discrepancy occurs due to any arbitrary modification
or disassembly, LG.Philips LCD is not responsible for
(7) While moving the product, be sure to turn off the power, function, quality or other items.
disconnect all cables and watch your step. Dropping the
product may cause injuries from electric shock. So, while (16) Within the warranty period, general faults may be charged
moving the product handle with care. for depending on responsibility for the faults. You handle
with care.
(8) When cleaning the panel is necessary, wipe it with a soft
and moistened cloth a neural detergent. Caution on
connector area. Do not use chemicals such as thinner or
benzene.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

SERVICING PRECAUTIONS

Color TFT LCD Module is apt to be damaged by both electrical and mechanical stresses.
Users, therefore, are requested to follow the "Servicing precautions of color TFT LCD Module" on the followings.

System Assembler

(1) Follow power sequence. (7) Check a connection of the Inverter & Backlight
Abnormal power sequence may cause critical malfunction connectors.
or electrical damage. Incomplete connection with can cause burnt in Backlight
connector or damage the inverter.
(2) Prevent physical stress.
(8) Handle with care.
(3) Prevent overheat. Please do not drop, bend or hit the LCD Module. Physical
High temperature on the surface of the screen may cause stress can cause the defect such as broken.
poor quality. Please make LCD Module used on specified
temperature. (9) Keep mounting screw length and motor driver's torque.
Low temperature under 10 makes LCD Module respond Strong weaken motor driver's torque can make a
slowly, make Backlight worse operated and shorten very mechanical defect on LCD Module. Please keep the
much the lifetime accordingly. specification.

(4) Keep LCD Module dust-free. (10) Do not operate for a long time under the same pattern.
LCD Module is sensitive against dust. Operating LCD Module for a long time under the same
Dust can cause visual or functional problem. pattern can cause image persistence and can damage it.

(5) Do not touch TCP area. (11) Defect panel also handled with care.
Do not touch TCP area at any case. It causes Driver IC To prevent making another defect, please handle the
crack, film crack etc. TCP is the weakest point of LCD defective LCD Module as a good one.
Module. Defective LCD Module should be repaired.

(6) Do not pull Backlight wire. (12) Do not stack LCD Modules.
Please do not pull the Backlight wire it can cause the wire LCD Module consists of fragile components such as TCPs
disconnected or damaged. or Glasses.
Stacking LCD Module can cause undesired defects.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
Korean
(13) Do not provide strong pressure at connecting. (15) Never connect/disconnect at power on.
Strong pressure can transfer the force to TCP which is the LCD Module consists of CMOS which is known as weak
weakest parts of LCD Module. Eventually can make TCP component against EOS. It can hurt the product.
crack or other unexpected defect.
(16) Electro-static discharge can make damage.
(14) Let the Backlight Wire backside of LCD Module. Semi-assembled product should be handled with wrist strap.
If let the Backlight wire front side of LCD Module, the Earth human body when handle the LCD Module.
Backlight connector can hurt the surface of polarizer. Please do not touch the interface connector pin.

System Assembler/End User

(1) Keep clean the surface. (4) Keep out of water.
Please wear rubber glove when touch the surface of LCD Water on in the LCD Module can cause electrical short or
Module screen. corrosion.
Please use soft and anti-static material with n-Hexane as Please wipe out or dry water carefully.
cleaner.
(5) Keep LCD Module corrosive gases free.
(2) Be careful not to make polarizer scratch. Corrosive gas makes the polarizer and the circuitry parts
Surface of polarizer is soft, so it's easily scratched. chemical damages and eventually cause defects.
Please do not touch, press or rub on polarizer surface with
materials over HB hardness. (6) Keep the suitable temp. & suitable humidity.
High temp. & high humidity shorten the lifetime.
(3) Be careful swift Temperature & Humidity change.
Swift temperature and or humidity change can make dew
condensation or ice which cause nonconformance such as
malfunction.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

CONTENTS

1. Product Overview ............................................ 7
2. Module Formation ........................................... 8
3. Exploded View .............................................. 10
4. Exploded View Parts List .............................. 11
5. Block Diagram ............................................... 12
6. Trouble shooting ............................................ 13
7. Timing Check Sheet .......................................18
8. Disassembly .................................................. 19
9. Assembly ....................................................... 23
10. Parts List ....................................................... 29
11. Records of Revision ....................................... 32
12. Derivative description .................................... 33

* Annexing : Schematic Diagram / Printed Circuit Board

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
1. Product Overview

Korean
General Description
TFT-LCD is made up of the lower plate glass with TFT, the upper plate glass with color filter, the middle
Liquid Crystal. TFT convey and control the signal and the Liquid Crystal control transmitted ray as
molecular structure different by admitted volt. And as the ray pass color filter, show up the wanted color
and picture.
The LP141WP1-TLA1 is 14.1 inches diagonally measured active display area with WXGA+ resolution(900
vertical by 1440 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots
which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with
a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors.
The LP141WP1-TLA1 has been designed to apply the interface method that enables low power, high speed,
low EMI.
The LP141WP1-TLA1 is intended to support applications where thin thickness, low power are critical
factors and graphic display are important. In combination with the vertical arrangement of the sub-pixels,
the LP141WP1-TLA1 characteristics provide an excellent flat display for office automation products such
as Notebook PC.

General Features

Active Screen Size 14.1 inches diagonal
Outline Dimension 320(H) 206(V) 5.5(D, max)mm
Pixel Pitch 0.2109 mm 0.2109 mm
Pixel Format 1440 horiz. By 900 vert. Pixels RGB strip arrangement
Color Depth 6-bit, 262,144 colors
Luminance, White 220 cd/m2(Typ. 5point)
Power Consumption Total 6.0 Watt(Typ.)
Weight 435g (Max.), 425g(Typ.)
Display Operating Mode Transmissive mode, normally white
Surface Treatment Anti-glare treatment of the front polarizer

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

2. Module Formation

* Connector 1(CN1) : User Connector

Source COF(D-IC)

Source PCB

Cover Shield(Source)
* Connector 1(CN1)
Case Ass'y
Cover Shield(Gate)
Adhesive Tape

Backlight Label

Backlight Ass'y
ID Label

Backlight Wire Inverter Bracket Gate COF(COF)

Backlight Wire Adhesive Tape
Fixed Tape Inverter
Inverter Fixed Screw

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
Module Connector Pin configuration(CN1)

NO Symbol Description Notes

1 GND Ground
1. Interface chips

Korean
2 VCC Power Supply, 3.3V Typ. 1.1 LCD : DAWIN,DTML012(LCD Controller)
including LVDS Receiver
3 VCC Power Supply, 3.3V Typ.
(DAWIN co., LVD4107 x 2each)
4 V EEDID DDC 3.3V power 1.2 System : It must include international standard
LVDS Trasmitter.
5 BIST Reserved for LCD supplier test point
Pin to Pin compatible with LVDS
6 Clk EEDID DDC Clock
2. Connector
7 DATA EEDID DDC Data
2.1 LCD : GT101-30S-HR11,LGC or its compatibles.
8 RA1- Negative LVDS differential data input,R0-G5,G0 2.2 Mating : FI-X30M or equivalent.
2.3 Connector Pin arrangement
9 RA1+ Positive LVDS differential data input,R0-G5,G0

10 GND Ground

11 RB1- Negative LVDS differential data input,G1-G5,B0-B1 [LCD Module Rear View]

12 RB1+ Positive LVDS differential data input,G1-G5,B0-B1
30 1
13 GND Ground

14 RC1- Negative LVDS differential data input,B2-B5,HS/VS/DE

15 RC1+ Positive LVDS differential data input,B2-B5,HS/VS/DE

16 GND Ground

17 RCLK1- Negative LVDS differential clock input

18 RCLK1+ Positive LVDS differential clock input

19 GND Ground

20 RA2- Negative LVDS differential data input,R0-G5,G0

21 RA2+ Positive LVDS differential data input,R0-G5,G0

22 GND Ground

23 RB2- Negative LVDS differential data input,G1-G5,B0-B1

24 RB2+ Positive LVDS differential data input,G1-G5,B0-B1

25 GND Ground

26 RC2- Negative LVDS differential data input,B2-B5,HS/VS/DE

27 RC2+ Positive LVDS differential data input,B2-B5,HS/VS/DE

28 GND Ground

29 RCLK2- Negative LVDS differential clock input

30 RCLK2+ Positive LVDS differential clock input

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

3. Exploded View

14
02
13

12
16

04
11

07
06

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
4. Exploded View Parts List

Korean
No. PART NO. DESCRIPTION

1 5135L-0011V Protect Film

2 7250L-0023A Masking, Tape

3 3111L-0149A Case Ass'y

6308L-0039A POLARIZER(TOP)
4
6308L-00657A POLARIZER(BOTTOM)

5 6091L-0350A BACKLIGHT Ass'y

6 6913L-0260C Lamp Ass'y

7 7250L-0080D Tape, Adhesive

8 7250L-0077A Tape, Teraoka

9 7250L-0074C Tape, Teraoka

10 3550S-0271A Cover shield , Gate

11 3550S-0263A Cover shield , Source

12 0IOKL-0039A TCP (D-IC, Gate)

13 0IHYL-0105A TCP (D-IC, Source)

14 6871L-0785A PWB(PCB) Ass'y , Source

15 6632L-0263A INVERTER

16 1STZL-0002B Screw

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

5. Block Diagram

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
6. Trouble shooting

Korean
Means that the screen is not affected by the signal data when you connect the product to Backlight or
No Display
user connector and then 3.3V(Vcc) input power ON/OFF.

F1 Pool soldering / less than Electricity Consumption more than
Damage check 100mA

F1 Replace / CN1 PIN Damage / NO Replace /
Resoldering Pool soldering check Resoldering

YES

L1 Pool soldering / NO Replace /
Damage voltage check Resoldering

YES

US1 Pool soldering/Short/ NO Replace /
Oneself badness check/
RESET check
Resoldering

YES

Source, Gate input/output check
D/IC oneself badness / NO Replace
Bonding badness

* Notes : It can use a Power IC(US1), One Chip.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

NO
Abnormal Display CN1 PIN bend / Pool soldering check Replace/Resoldering
Means that the screen is affected
YES
by the signal data when you
connect the product to Backlight or
user connector and then turn NO
Panel Edge damage check Panel dump
3.3V(Vcc) input power ON/OFF.
YES

UC1 Input/Output, Voltage, Signal check NO
Short / Pool soldering / Around circuit check Replace/Resoldering

YES

RESET, RESET2 Voltage check NO
Replace/Resoldering
R17,R18,C11,C12
Around circuit check

YES

VDD,VCC Voltage check US1 NO
Replace/Resoldering
Around circuit check

YES

VGH Voltage check NO
Replace/Resoldering
D3 Around circuit check

YES

VGL Voltage check NO
Replace/Resoldering
R62, R64 Around circuit check

YES

VCOM Voltage check NO
Replace/Resoldering
VR1,C41 Around circuit check

YES

GMA Voltage check SOURCE DRIVE IC GMA NO
Replace/Resoldering
Check of lower GMA TP

YES

NO
S - #1, G - #1 Replace
Bonding check

YES

Source PCB NO
Replace
Internal Short / Open check

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Means that the abnormal screen displays at specified color when you connect the product to Backlight
Abnormal Color
or user connector and then turn 3.3V(Vcc) input power ON/OFF.

CN1 #1~24, AR1,AR2 NO Replace /
Pool soldering / Short check Resoldering

YES
Global LCD Panel Exchange Center

UC1 #36~48
#53~64 NO Replace /
Pool soldering / Resoldering
Short check

YES

R19~R30
NO Replace /
Pool soldering / Short Damage
Resoldering
check
www.panelook.com

YES

Source D/IC NO Replace /
Check input / output Resoldering

YES

Source PCB NO Replace / * Notes : Applied with mini LVDS T-con : RGB
Internal Short / Open check Resoldering signal and Clock are not divided.

Korean English

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

EDID Operation Screen

How to use Button

(1) < Write Data > : Write EDID Data(Standard Data at the left> on EEPROM.
(2) < Write Data&Verify > : After confirming EDID Data, mark the OK, NG.
(3) < Read Data > : Read and mark EDID Data to the EEPROM.
(4) < Read Data&Verify > : Altering marking EDID Data by EEPROM, compare with standard data to mark
OK, NG.
(5) < Init > : Initializing board => OK : GREEN, NG : RED
When board displays RED, After click the inspection option , check the address.
(6) < Start > : After connecting the Module, confirm connected state => OK : GREEN, NG : RED
When board displays RED contact connector or confirm power(3.3V).
(7) < Close > : End the program.

How to work

(1) Operate the program.
(2) Click the button.
(3) Open the wanted model data, If not, program is edited.
(4) After connecting Module, confirm power(3.3V).
(5) Progress the wanted one(Write & Read).

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
EDID Badness CN1 PIN bend / Pool soldering NO Replace /
Damage check Resoldering
On the test - screen, when comparing,
standard data with Read data, If it is YES
failed, it is displayed NG on the test-

Korean
screen.
R12, 13, C13 NO Replace /
Pool soldering / Damage check Resoldering

YES

U1 Pool soldering / Short / NO Replace /
Oneself badness check Resoldering

YES

EDID Checksum check NO
EDID Re-write
(41)

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

7. Timing Check Sheet

Condition : (VCC = 3.3V)

DATA DATA
_ Setup _ Hold

DATA_S = 2.9ns DATA_H = 3.5ns

SSC SSC
_ High _ Low

SSC_H = 6.3ns SSC_L = 5.9ns

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
8. Disassembly

Korean
Separate Cover Separate Cover Separate Separate Separate Inverter Separate
Shield(Gate) Shield(Source) Adhesive Tape Adhesive/Fixed Tape. Fixed Screw. Inverter

Remove dust on the lower Separate Board Ass'y from Attach dummy sheet on the Remove dust on Separate
Polarizer. Backlight Ass'y. upper Polarizer. the upper Polarizer. Case Ass'y

Attach dummy sheet on the Take charge of Board Attach the dummy sheet on
Charge the Backlight Ass'y in Bag.
lower Polarizer. Ass'y in tray. Backlight Ass'y.

Separate the Cover Shield(Gate).

Should be put on (electro static) wrist strap.
Should be cleared the bottom.
Light the Ion Blower.

Separate the Cover Shield(Source).

Separate the Adhesive Tape of the opposite Gate.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Separate Cover Separate Cover Separate Separate Separate Inverter Separate
Shield(Gate) Shield(Source) Adhesive Tape Adhesive/Fixed Tape. Fixed Screw. Inverter

Remove dust on the lower Separate Board Ass'y from Attach dummy sheet on the Remove dust on Separate
Polarizer. Backlight Ass'y. upper Polarizer. the upper Polarizer. Case Ass'y

Attach dummy sheet on the Take charge of Board Attach the dummy sheet on
Charge the Backlight Ass'y in Bag.
lower Polarizer. Ass'y in tray. Backlight Ass'y.

Separate the
Adhesive Tape &
Backlight Wire fixed Tape of the opposite Source PCB.

Separate the fixed screw of Inverter.

Separate the Inverter.

If you need to replace the Inverter, separate the
Inverter.
It s unnecessary to repair the normal TCP / Polarizer.

Separate the Case Ass'y.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
Separate Cover Separate Cover Separate Separate Separate Inverter Separate
Shield(Gate) Shield(Source) Adhesive Tape Adhesive/Fixed Tape. Fixed Screw. Inverter

Remove dust on the lower Separate Board Ass'y from Attach dummy sheet on the Remove dust on Separate
Polarizer. Backlight Ass'y. upper Polarizer. the upper Polarizer. Case Ass'y

Attach dummy sheet on the Take charge of Board Attach the dummy sheet on
Charge the Backlight Ass'y in Bag.

Korean
lower Polarizer. Ass'y in tray. Backlight Ass'y.

Remove dust on the upper Polarizer.

Attach the dummy sheet on the upper Polarizer.

Separate the Board Ass'y from Backlight Ass'y.

Remove dust on the lower Polarizer.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Separate Cover Separate Cover Separate Separate Separate Inverter Separate
Shield(Gate) Shield(Source) Adhesive Tape Adhesive/Fixed Tape. Fixed Screw. Inverter

Remove dust on the lower Separate Board Ass'y from Attach dummy sheet on the Remove dust on Separate
Polarizer. Backlight Ass'y. upper Polarizer. the upper Polarizer. Case Ass'y

Attach dummy sheet on the Take charge of Board Attach the dummy sheet on
Charge the Backlight Ass'y in Bag.
lower Polarizer. Ass'y in tray. Backlight Ass'y.

Attach the dummy sheet on the lower Polarizer.

Take charge of the Board Ass'y in tray.

Attach the dummy sheet on Backlight Ass'y.

Take charge of the Backlight Ass'y in Bag.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

English
Korean
9. Assembly

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper Polarizer. Gate COF

Assemble the fixed screw Attach a Attach a Cover Attach a Cover Attach
of Inverter. Adhesive fixed Tape. Shield(Source) Shield(Gate) Adhesive Tape

Final Attach the protection film on Clean the upper Separate dummy sheet on the
Wrap module
inspection the upper Polarizer. Polarizer. upper Polarizer.

Detach the protection film on the lower Polarizer.

Detach it to opposite direction for preventing
static electricity.
Should be put on (electro static) wrist strap.
Should be cleared the bottom.
Light the Ion Blower.

Polish the lower Polarizer with soft wiper.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper Polarizer. Gate COF

Assemble the fixed screw Attach a Attach a Cover Attach a Cover Attach
of Inverter. Adhesive fixed Tape. Shield(Source) Shield(Gate) Adhesive Tape

Final Attach the protection film on Clean the upper Separate dummy sheet on the
Wrap module
inspection the upper Polarizer. Polarizer. upper Polarizer.

Remove dust of lower Polarizer with a Air Gun.

Detach the dummy sheet on Backlight Ass'y.

Assemble the Board Ass'y with Backlight Ass'y.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y

English
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper Polarizer. Gate COF

Assemble the fixed screw Attach a Attach a Cover Attach a Cover Attach
of Inverter. Adhesive fixed Tape. Shield(Source) Shield(Gate) Adhesive Tape

Korean
Final Attach the protection film on Clean the upper Separate dummy sheet on the
Wrap module
inspection the upper Polarizer. Polarizer. upper Polarizer.

Attach and fold up Source PCB / Gate COF into
Backlight Ass'y bottom.

Be careful TCP(Tape Carrier Package),
COF(Chip On Film)crack.

Detach the protection film on the upper Polarizer.

Take a first screen inspection the Backlight.

Check the Backlight dust.

Assemble the Case Ass'y.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper Polarizer. Gate COF

Assemble the fixed screw Attach a Attach a Cover Attach a Cover Attach
of Inverter. Adhesive fixed Tape. Shield(Source) Shield(Gate) Adhesive Tape

Final Attach the protection film on Clean the upper Separate dummy sheet on the
Wrap module
inspection the upper Polarizer. Polarizer. upper Polarizer.

Attach the dummy sheet on the upper Polarizer.

Attach the Inverter.

If you need to replace the Inverter, separate the
Inverter. It's unnecessary to repair the normal TCP /
Polarizer.

Assemble the fixed screw of Inverter.

Attach the
Adhesive Tape &
Backlight Wire fixed Tape of the opposite Source PCB.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y

English
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper Polarizer. Gate COF

Assemble the fixed screw Attach a Attach a Cover Attach a Cover Attach
of Inverter. Adhesive fixed Tape. Shield(Source) Shield(Gate) Adhesive Tape

Korean
Final Attach the protection film on Clean the upper Separate dummy sheet on the
Wrap module
inspection the upper Polarizer. Polarizer. upper Polarizer.

Attach the Cover Shield(Source).

Attach the Cover Shield(Gate).

Attach the Adhesive Tape of the opposite Gate.

Separate the dummy sheet on the upper Polarizer.

Detach it to opposite direction for preventing
static electricity.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Detach the protection Clean the lower Remove dust the Detach the dummy Assemble Board Ass'y
film on the lower Polarizer. Polarizer. lower Polarizer. sheet on Backlight Ass'y. with Backlight Ass'y.

Attach Attach dummy sheet on Assemble the First screen Detach the protection film Attach Source PCB/
Inverter the upper Polarizer. Case Ass'y. inspection on the upper

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo