Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 37.0" WXGA TFT LCD
BUYER KONKA SUPPLIER LG Display Co., Ltd.
MODEL *MODEL LC370WXE
SUFFIX SDP1 (RoHS Verified)
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE
/ J.Y. Lee /Team Leader
REVIEWED BY
/ S.H. Kim / Project Leader
PREPARED BY
/ D.S. Choi / Engineer
Please return 1 copy for your confirmation with TV Product Development Dept.
your signature and comments. LG Display Co., Ltd.
Ver. 1.0 1 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
CONTENTS
Number ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 10
3-3 SIGNAL TIMING SPECIFICATIONS 12
3-4 SIGNAL TIMING WAVEFORMS 13
3-5 COLOR DATA REFERENCE 14
3-6 POWER SEQUENCE 15
4 OPTICAL SPECIFICATIONS 16
5 MECHANICAL CHARACTERISTICS 20
6 RELIABILITY 23
7 INTERNATIONAL STANDARDS 24
7-1 SAFETY 24
7-2 EMC 24
8 PACKING 25
8-1 INFORMATION OF LCM LABEL 25
8-2 PACKING FORM 25
9 PRECAUTIONS 26
9-1 MOUNTING PRECAUTIONS 26
9-2 OPERATING PRECAUTIONS 26
9-3 ELECTROSTATIC DISCHARGE CONTROL 27
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 27
9-5 STORAGE 27
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 27
Ver. 1.0 2 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
RECORD OF REVISIONS
Revision No. Revision Date Page Description
Ver. 1.0 3 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
1. General Description
The LC370WXE is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive display type which is operating in the normally black mode. It has a 37.02 inch diagonally
measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
Therefore, it can present a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.
Mini-LVDS(RGB)
EEPROM
Source Driver Circuit
SCL SDA S1 S1366
+12.0V G1
Gate Driver Circuit
LVDS Timing Controller
5pair CN1
(30pin) [LVDS Rx]
Select #9 TFT - LCD Panel
(1366 RGB 768 pixels)
Power Circuit G768
Block
High Input CN2, 3pin, 14 Lamps/@89 mA
Back light Assembly
High Input CN3, 3pin, 14 Lamps/@89mA
General Features
Active Screen Size 37.02 inches(940.3mm) diagonal
Outline Dimension 877.0mm(H) x 516.8mm(V) x 46.9mm(D) (Typ.)
Pixel Pitch 0.200mm x 0.600mm x RGB
Pixel Format 1366 horiz. by 768 vert. pixels RGB stripe arrangement
Color Depth 8-bit, 16.7 M colors
Luminance, White 380 cd/m2 (Center 1 point) (Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178(Typ.), U/D 178(Typ.))
Power Consumption Total 88.2 Watt (Typ.) (Logic= 3.2 W, Inverter= 85W @ with inverter )
Weight 6,950(Typ.)
Display Mode Transmissive mode, Normally black
Surface Treatment Hard coating, Anti-glare treatment of the front polarizer (Haze 13%)
Ver. 1.0 4 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
2. Absolute Maximum Ratings
The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD module.
Table 1. ABSOLUTE MAXIMUM RATINGS
Value
Parameter Symbol Unit Remark
Min Max
Power Input
LCD circuit VLCD -0.3 +14.0 V [DC] r
Voltage
Operating
B/L Input voltage Voltage (one VOP 700 1100 V[ RMS] r
side)
Operating Temperature TOP 0 +50 C
Storage Temperature TST -20 +60 C
Note 1
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH
Notes : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be Max 39 C and no condensation of water.
2. Gravity mura can be guaranteed below 40 condition.
90%
60
60%
50 Storage
Humidity [(%)RH]
Wet Bulb
Temperature [ C]
40
40%
Operation
30
20
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [ C]
Ver. 1.0 5 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power for the LCD circuit. The other Is used for the EEFL
backlight and inverter circuit.
Table 2. ELECTRICAL CHARACTERISTICS
Value
Parameter Symbol Unit Note
Min Typ Max
Circuit :
Power Input Voltage VLCD 10.8 12.0 13.2 VDC
- 260 338 mA 1
Power Input Current ILCD
- 350 455 mA 2
Power Consumption PLCD - 3.2 4.2 Watt 1
Rush current IRUSH - - 3.0 A 3
Notes : 1. The specified current and power consumption are under the VLCD=12.0V, 25 r 2 C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.).
White : 255Gray
Black : 0Gray
Mosaic Pattern(8 x 6)
Ver. 1.0 6 /44
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC370WXE
Product Specification
Table 3. ELECTRICAL CHARACTERISTICS (Continue)
Values
Parameter Symbol Unit Note
Min Typ Max
Backlight Assembly :
Operating Voltage
VBL 882 980 1078 VRMS 1, 2
(one side,fBL=63KHz, IBL=90 mARMS )
Operating Current (one side) IBL 84.55 89 93.45 mARMS 1
Striking Voltage
VOPEN 1190 - 1430 VRMS 1, 3
(Open Lamp Voltage @ one side)
Operating Frequency fBL 61 63 65 kHz 4
Striking Time S TIME 1.5 - - sec 3
Power Consumption PBL - 85 - Watt 6
Burst Dimming Duty {a/T} * 100 20 100 % 9
Burst Dimming Frequency 1/T 95 182 Hz 9
Values
Parameter Symbol Unit Note
Min Typ Max
Lamp : (APPENDIX-V)
Lamp Voltage (one side) VLAMP 890 1125 1315 VRMS 1, 2
Lamp Current (one side) ILAMP 3 6.3 8.0 mARMS 1
Discharge Stabilization Time TS - - 3 Min 1, 5
Lamp Frequency f LAMP 61 63 65 KHz
Established Starting Voltage VS 1190 VRMS 1, 3
Life Time 50,000 60,000 Hrs 7
Note The design of the inverter must have specifications for the lamp in LCD Assembly.
The electrical characteristics of inverter are based on High-High Driving type.
The performance of the lamps in LCM, for example life time or brightness, is extremely influenced by the
characteristics of the DC-AC inverter. So, all the parameters of an inverter should be carefully designed so
as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the
lamp and the inverter (no lighting, flicker, etc) has never been occurred. When you confirm it, the LCD